Panasonic TQBH0215-1 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Panasonic TQBH0215-1. Panasonic TQBH0215-1 19 stron. Network operation manual

Using WebBrowser

Monitor information window

This page indicates the projector status.

To access this page from other pages, click [Status] in the main menu (at the left of the window).

Projector status

On this window, click the [Projector status] tab.

The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [View] →

[Refresh].

If [SELF TEST Error (Detail)] appears on the Monitor

information window, click it to view the error details.

If [FAILED] appears

Item

MAIN CPU BUS

FAN

INPUT AIR TEMPERATURE

OUTPUT AIR TEMPERATURE

LAMP REMAIN TIME

LAMP STATUS

INPUT AIR TEMP.SENSOR

OUTPUT AIR TEMP.SENSOR

BATTERY

AIR FILTER

(cont.)

There is a problem with a microcontroller circuit. Contact your dealer.

There is a problem with the fan or fan drive circuit. Contact your dealer.

Input air temperature is high. The projector is likely being used in a high temperature

environment such as near heating equipment.

Temperature surrounding the lamp is high. The exhaust vent is likely blocked.

The lamp has been used for longer than its rated useful life, and it is time to replace it.

The lamp could not be lit.

Allow the bulb of the light source to cool, and then turn on the projector.

There is a problem with the air intake temperature sensor. Contact your dealer.

There is a problem with the exhaust temperature sensor. Contact your dealer.

The battery must be replaced. Contact your dealer.

The remaining filter gets low.

For further detail, see the Basic Manual.

Network status

On this window, click the [Network status] tab.

Description