Panasonic WEMV180A - VIDEO IMAGER Instrukcja serwisowa - Strona 18
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Projektor Panasonic WEMV180A - VIDEO IMAGER. Panasonic WEMV180A - VIDEO IMAGER 36 stron. Video imager
Również dla Panasonic WEMV180A - VIDEO IMAGER: Instrukcja obsługi (35 strony), Instrukcja obsługi (35 strony)
Drukuj stronę
Fig. 6-12
8
Referring to Fig. 6-13, remove two hexagon nuts that
secure the Mounting Bracket and remove the Mounting
Bracket.
Fig. 6-13
8
Referring to Fig. 6-14, remove two screws that secure the
Plate Sub Ass'y and remove the Plate Sub Ass'y.
Remove two screws.
Fig. 6-14
Mounting of the Camera Unit
8
Referring to Fig. 6-15, mount the Plate Sub Ass'y to the
Camera Unit by two screws.
Loosen two hexagon
socket set screws.
Remove two hexagon nuts.
Mounting Bracket
Plate Sub Ass'y
Camera Unit
8
Referring to Fig. 6-16, mount the Mounting Bracket to the
Plate Sub Ass'y by two hexagon nuts.
8
Referring to Fig. 6-17, mount the Zoom Switch Board to
the Mounting Bracket by two screws.
8
Connect two connectors from the Camera Unit to CN1 and
CN3 on the Zoom Switch Board.
CN1
CN3
8
Referring to Fig. 6-18, mount the Camera Unit with the
Mounting Bracket to the Camera Cover by four screws.
8
Connect cable to CN2 on the Zoom Switch Board.
8
Clamp the wire by the Wire Clamper.
8
Hold the cable of CN2 of the Camera Unit at the Mounting
Bracket using with the Cloth Adhesive Tape.
15
Tighten two screws.
Plate Sub Ass'y
Camera Unit
Fig. 6-15
Hexagon Nuts
Washers
Mounting Bracket
Fig. 6-16
Tighten
two screws.
Zoom Switch Board
Fig. 6-17