Panasonic DVD-CV37 Instrukcja obsługi - Strona 21
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Panasonic DVD-CV37. Panasonic DVD-CV37 24 stron. Dvd/cd player
Również dla Panasonic DVD-CV37: Instrukcja obsługi (24 strony), Instrukcja obsługi (24 strony), Instrukcja obsługi (32 strony), Instrukcja obsługi (29 strony), Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
Bitstream
This is the digital form of multiple channel audio data (e.g., 5.1 channel)
before it is decoded into its various channels.
Decoder
A decoder restores the coded audio signals on DVDs to normal. This is
called decoding.
Dolby Digital
This is a method of coding digital signals developed by Dolby Laboratories.
Apart from stereo (2-channel) audio, these signals can also be multi-
channel audio. A large amount of audio information can be recorded on
one disc using this method.
Dolby Pro Logic
A surround system where a 4-channel audio track is recorded as 2
channels and then is restored to 4 channels for play. The surround channel
is monaural and can reproduce up to 7 kHz,
DTS (Digital Theater Systems)
This surround system is used in many movie theaters around the world.
There is good separation between the channels, so realistic sound effects
are possible.
Dynamic range
Dynamic range is the difference between the lowest level of sound that can
be heard above the noise of the equipment and the highest leve! of sound
before distortion occurs.
Film and video
DVD-Videos
are recorded using either film or video. Usually, film is
recorded at 24 frames per second, the rate movies are filmed at, while
video is recorded at 30 frames per second.
Product Service
Frame still and field still
Frames are the still pictures that go together to make a moving picture.
There are about 30 frames shown each second.
One frame is made up of two fields. A regular television shows these fields
one after the other to create frames.
A still is shown when you pause a moving picture. A frame still is made up
of two alternating fields, so the picture may appear blurred, but overall
quality is high. A field still is not blurred, but it has only half the information
of a frame still so picture quality is lower.
Interlace and progressive output
NTSC, the video signal standard, has 480 interlaced (i) scan lines,
whereas progressive scanning uses twice the number of scan lines. This is
called 480p. The video signals output from this unit's COMPONENT
VIDEO OUT terminals (Y, Pe, Pa) allow you to enjoy higher quality pictures
than if the signals were output from the VIDEO OUT terminal or S VIDEO
OUT terminal.
VP/B
MPEG 2, the video compression standard adopted for use with DVD-
Video, codes frames using these 3 picture types.
i:
Intra coded picture (I-picture)
This is the standard picture and is a complete picture in itself. This
means it has the best picture quality and is the best to use when
adjusting the picture.
P: Predictive coded picture (P-picture)
This picture is calculated based on past i or P-pictures.
B: Bidirectionally-predictive coded picture (B-picture)
This picture is calculated by comparing past and future | and P-pictures
so it has the lowest volume of information.
Linear PCM (pulse code modulation)
These are uncompressed digital signals, similar to those found on CDs.
Playback control (PBC)
If a Video CD has playback control, you can select scenes and information
with menus (called menu play in these instructions).
1. Damage requiring service—The unit should be serviced by qualified
service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change i in
performance; or
(a) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in
these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer
uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result
in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working condition.
Product information
l
For product information or assistance with product operation:
In the U.S.A., -contact
the Panasonic
Customer
Call Center
at
1-800-211-7262, or e-mail [email protected], or web
site (http/Avww.panasonic.com).
In Canada, contact Panasonic Canada Inc. Customer Care Centre at
1-800-561-5505,
web
site
(www.panasonic.ca),
or
an
authorized
Servicentre closest to you.
Refe
Mi
2
RQT6519
=,