Panasonic MW10 - 9.0" - Digital Photo frame Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Panasonic MW10 - 9.0" - Digital Photo frame. Panasonic MW10 - 9.0" - Digital Photo frame 24 stron. Multimedia audio system
Również dla Panasonic MW10 - 9.0" - Digital Photo frame: Instrukcja obsługi (24 strony)

Drukuj stronę

1. Control Guide

Safety precautions

Placement

Set the unit up on an even surface away from direct sunlight,

high temperatures, high humidity, and excessive vibration.

These conditions can damage the cabinet and other

components, thereby shortening the unit's service life.

Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload

the unit and cause a ﬁ re.

Do not use a DC power source. Check the source carefully

when setting the unit up on a ship or other place where DC

is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not

damaged. Poor connection and lead damage can cause ﬁ re

or electric shock. Do not pull, bend, or place heavy items on

the lead.

Grasp the plug ﬁ rmly when unplugging the lead. Pulling the

AC mains lead can cause electric shock.

Do not handle the plug with wet hands. This can cause

electric shock.

Foreign matter

Do not let metal objects fall inside the unit. This can cause

electric shock or malfunction.

Do not let liquids get into the unit. This can cause electric

shock or malfunction. If this occurs, immediately disconnect

the unit from the AC mains supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain

ﬂ ammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is

interrupted, indicators fail to light, smoke appears, or any

other problem that is not covered in these instructions

occurs, disconnect the AC mains lead and contact your

dealer or an authorized service centre. Electric shock

or damage to the unit can occur if the unit is repaired,

disassembled or reconstructed by unqualiﬁ ed persons.

Extend operating life by disconnecting the unit from the AC

mains if it is not to be used for a long time.

Caution for AC Mains Lead

For United Kingdom

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains

plug for your safety and convenience.

A 5-ampere fuse is ﬁ tted in this plug.

Should the fuse need to be replaced please ensure that

the replacement fuse has a rating of 5-ampere and that it is

approved by ASTA or BSI to BS1362.

Check for the ASTA mark

body of the fuse.

If the plug contains a removable fuse cover you must ensure

that it is reﬁ tted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your local

dealer.

or the BSI mark

on the

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE

FOR THE SOCKET OUTLET IN YOUR HOME THEN

THE FUSE SHOULD BE REMOVED AND THE PLUG

CUT OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL

SHOCK IF THE CUT OFF PLUG IS INSERTED INTO

ANY 13-AMPERE SOCKET.

If a new plug is to be ﬁ tted please observe the wiring code

as stated below.

If in any doubt please consult a qualiﬁ ed electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with

the following code:

Blue: Neutral, Brown: Live.

As these colours may not correspond with the coloured

markings identifying the terminals in your plug, proceed as

follows: The wire which is coloured Blue must be connected

to the terminal which is marked with the letter N or coloured

Black or Blue.

The wire which is coloured Brown must be connected to the

terminal which is marked with the letter L or coloured Brown

or Red.

WARNING: DO NOT CONNECT EITHER WIRE TO THE

EARTH TERMINAL WHICH IS MARKED WITH THE

LETTER E, BY THE EARTH SYMBOL

GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF–KEEP DRY.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC

mains plug (ﬁ gures A and B). Conﬁ rm the AC mains plug

ﬁ tted and follow the instructions below. Illustrations may

differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A

2. Replace the fuse and close or attach the fuse cover.

Figure A

Fuse

(5 ampere)

OR COLOURED

Figure B

Fuse cover

Figure B

Fuse

(5 ampere)