Panasonic SCPM41 - MINI HES W/CD PLAYER Instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Panasonic SCPM41 - MINI HES W/CD PLAYER. Panasonic SCPM41 - MINI HES W/CD PLAYER 20 stron. Cd stereo system model no. sc-pm41
Również dla Panasonic SCPM41 - MINI HES W/CD PLAYER: Instrukcja obsługi (20 strony)

Panasonic SCPM41 - MINI HES W/CD PLAYER Instrukcja obsługi
Specifi cations
AMPLIFIER SECTION
RMS Output power both channel driven
10% total harmonic distortion
1 kHz
(Low channel)
SC-PM19
8 kHz
(High channel)
SC-PM19
Total Bi-Amp power
Input Impedance
Output Impedance
Headphone
FM TUNER SECTION
Frequency range
87.50 MHz – 108.00 MHz (50 kHz steps)
Sensitivity
S/N 26 dB
Antenna terminals
Preset station
AM TUNER SECTION
Frequency range
522 kHz – 1629 kHz (9 kHz steps)
520 kHz – 1630 kHz (10 kHz steps)
Sensitivity
S/N 20 dB (at 999 kHz)
Preset station
CASSETTE DECK SECTION
Track system
Heads
Record/playback
Erasure
Motor
Recording system
Erase system
Tape speed
Overall frequency response (+3 dB, –6 dB) at DECK OUT
NORMAL
S/N RATIO
Wow and fl utter
Fast forward and rewind time
Approx. 120 seconds with C-60 cassette tape
CD SECTION
Disc
CD, CD-R, CD-RW, MP3
Sampling frequency
CD
MP3
Bit rate
Decoding
Pick up
Beam source/wavelength
(For Norge)
Bølgelengde
Laserstyrke
Number of channels
Frequency response
Wow and fl utter
Digital fi lter
D/A converter
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
41 W per channel (6 Ω)
39 W per channel (6 Ω)
SC-PM19
80 W per channel
SC-PM19250 mV
16 Ω – 32 Ω
1.02 µV (IHF)
1.00 µV
75 Ω (unbalanced)
15
900 µV/m
15
4 track, 2 channel
Solid permalloy head
Double gap ferrite head
DC servo motor
AC bias 100 kHz
AC erase 100 kHz
4.8 cm/s
35 Hz – 14 kHz
42.64 dB (A weighted)
0.08% (WRMS)
8 cm/12 cm
44.1 kHz
32 kHz, 44.1 kHz, 48 kHz
32 kbps – 320 kbps
16/20/24 bit linear
Semiconductor laser/780 nm
780 nm
Ingen farlig stråling sendes ut
Stereo
20 Hz – 20 kHz (+1dB, –2 dB)
Below measurable limit
8 fs
MASH (1 bit DAC)
SPEAKER SECTION
Type
Speaker(s)
Woofer
Tweeter
Super tweeter
Impedance
Input power (IEC)
HIGH
LOW
Output sound pressure
Cross over frequency
Frequency range
Dimensions (WxHxD)
Mass
GENERAL
Power supply
For Continental Europe
For United Kingdom, Australia and N.Z.
Power consumption
Dimensions (WxHxD)
Mass
For Continental Europe and United Kingdom
For Australia and N.Z.
Power consumption in standby mode 0.6 W
Notes:
1. Specifi cations are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
3. The labels "HIGH" and "LOW" on the rear of the speakers refer to
High frequency and Low frequency.

Maintenance

Maintenance
If the surfaces are dirty
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
unit.
• Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
For a cleaner crisper sound
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback
and recording.
Use a cleaning tape (not included).

When moving the unit

When moving the unit
1
Remove all discs.
2
Press [y/I] to turn the unit off.
3
Disconnect the AC power supply cord.
3 way, 3 speaker system
10 cm cone type (6 Ω)
6 cm cone type (6 Ω)
piezo type
6 Ω
80 W (Max)
80 W (Max)
80 dB/W (1.0 m)
3 kHz, 10 kHz
42 Hz – 50 kHz (–16 dB)
50 Hz – 45 kHz (–10 dB)
145 mm x 247 mm x 230 mm
2.20 kg
AC 230 V, 50 Hz
AC 230 – 240 V, 50 Hz
130 W
175 mm x 254 mm x 391 mm
5.8 kg
5.6 kg
En
RQT8043-2B
L0205CP2035