Biomorph Personal Plus Podręcznik - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik dla Wyposażenie wnętrz Biomorph Personal Plus. Biomorph Personal Plus 15 stron.
Cable Diagram Personal Plus
IMPORTANT:
All cables must be tacked up and made neat with supplied cable guides. NO cables may hang down ex-
cept those passing through cable chains. Make sure cables have enough slack between surfaces to allow
full height adjustment between surfaces.
IMPORTANT:
Extend desktops to full opposite heights to ensure that cables will travel w/o stress).
4 PORT CONTROLLER
box for REAR surface
LONG CABLE/
FRONT LEG
POWER CABLE
SHORT CABLES
Use SHORT cables to connect 3 rear legs
to ports #1, #2 & #3 in controller box.
CABLE CAB
(Optional) Place door towards user.
POWER CABLE
Connect power cables to power
strips inside cable cabs.
CABLE CHAIN
Use to run cables from front surface
to rear surface. Push in from inside.
SWITCH
LONG CABLE/FRONT LEG
SHORT CABLE/REAR LEG
SHORT CABLE/REAR LEG
LONG CABLES
Use LONG cables to connect both front
legs to ports #1 & #2 in controller box.
CABLE TRACKS
Red FRONT surface
Blue REAR surface
SWITCH
for FRONT surface use long 45˚ angle bracket.
Control switches connect to port A1.
12
GROMMET HOLE
Place grommet into
grommet hole. Route
cable accordingly.
m
WIRE CLIP
A wire clip MUST be placed directly
behind switch to prevent cable droop