Easypix AQUA W318 Bubbles Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Aparat cyfrowy Easypix AQUA W318 Bubbles. Easypix AQUA W318 Bubbles 16 stron.

personal injury, or material loss.

Operation:

•Please don't attempt to take apart the camera. The high voltage parts are present within

the camera. If you take apart the camera, there will be dangerous electric shocks.

•If the internal camera parts are exposed as a result of being dropped, please don't touch

Any exposed portion by hands. Otherwise, there is a danger of receiving and electric

shock.

•Please don't expose the camera under the sunshine or the places of high temperature. It

may cause any damage on the internal parts or battery, even result in the explosion.

•Keep the memory card out of the reach of children in order to avoid any risk of it being swallowed

by the mistake.

•If there is smoke or strange sounds emitting from the camera, please stop using it, and also

remove the battery immediately. Please send back the camera to the retailer for repair.

•Please don't place your camera at high temperature and humidity environment.

•Before using the camera underwater, please install the battery and memory card first, and make

sure all covers are securely locked. Please also test this camera in water in advance, and make

sure there is no water getting inside.

• If you find the water gets inside the camera, please turn off the power, and go away the water

immediately.

•If the moisture appears on the lens during the use, it may be leaking. Please remove the battery

and memory card, and then send back this camera to the retailer for repair immediately.

•Please don't open the battery door when using underwater. This is to avoid the water getting

inside the camera, and an electric shock occurring.

•If it becomes hot during the use, please turn off the power and remove the battery immediately.

•This camera is waterproof and dustproof. Please don't take apart this camera by yourself. This

action may cause any damage on the camera. If this damage is caused, the user needs to take

the responsibility for repair.