BION CY-E517C Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Akcesoria rowerowe BION CY-E517C. BION CY-E517C 2 stron.

Drukuj stronę

BION CY-E517C Skrócona instrukcja obsługi

English

E500 Series

E512, E516T, E518T, E517C, E520C, E523A, E526AC

E512, E516, E518T, E523A

CY-E500

E517C, E520C, E526AC

Cadence & Speed Sensor

CY-E500

(Black)

Stabling Pads

Black：Cadence Magnet

Mounting

Cadence Magnet

Speed Magnet

White：Sensor Mounting

Bracket

Cycle Computer

Bracket

Rubber

(1)

(2)

Use the rubber to tighten the bracket to the handlebar or stem with the nylon ties.

Place the cycle computer on the bracket and secure it in clockwise.

E512, E516, E518T, E523A

Check the position of the front fork to find the suitable point to attach the speed sensor.

The distance between cycle computer & the speed sensor would be with 60 cm.

How to mount the Magnet

Screw

Sensor Point

Magnet

(Magnet)

(5)

(6)

Secure the Speed Magnet on the spoke of the front wheel with screw.

Make sure the magnet side faces the speed sensor zone.

The maximum distance between the speed sensor and the magnet on the spoke is 5 mm.

Once above items in the right position, the user may go for a ride.

Note:Please make sure everything has been setup correctly before riding the bicycle.

Installing the Cadence & Speed Sensor

Cadence Sensor

Speed Sensor

Stabling Pads

Nylon Ties

(4)

(White)

Mount the sensor on top of the left chain stay with long nylon ties, make sure the cadence side face

the front and speed side face the back. The distance between the sensor and the cycle computer

would approximately be 150 cm.

*NOTE:

1. The stabling pad has to be precisely

secured under the sensor.

2. Nylon ties have to be exactly and solidly bond

on the stabling pad.

3. Without proper bind, cadence sensor may be

crashed by the spoke of back freewheel.

How to mount the Magnet

(White)

Screw

Cadence Magnet

Speed Magnet

Stabling Pads

(Black)

(6)

(7)

Secure the Speed Magnet on the spoke of the back

wheel with screw. Make sure the magnet side faces the

speed sensor zone.The maximum distance between the

speed sensor and the magnet on the spoke is 5 mm.

Nylon

Ties

Secure the Cadence Magnet on the inner side of crank

and make sure the magnet side faces the cadence sensor

zone. Please use black stabling pad for cadence magnet

mounting. The maximum distance between the cadence

sensor and the magnet on the crank is 5 mm.

Once above items are in the right position, the user

may go for a ride.

Note:

Initial flashing green light indicates the sensor

detected magnet signals normally.

Please make sure everything has been setup

correctly before riding the bicycle.

Wheel Circumference

To get the accurate result, the wheel size should be

correct Mark the symbol on the tire and ride one

circle. Then measure the length between two points

to get the circumference. Or the user can also get

wheel circumference by the following equation:

Circumference(mm) = 2 x 3.14 x R(inch) x 2.54(1 inch=2.54 cm)

R=Radius in centimeter

The user can refer the "wheel size chart" for the wheel size

The cycle computer main display and Key function

E516T, E518T, E523A

Temperature

(Option CY-E516T, E518T)

E512

Sensor Point

(Sensor)

1~5mm

Press Mode key shortly to change mode.

(Clock)

(Trip Time)

(Average Speed)

(Max Speed)

E517C, E520C, E526AC

(Trip Distance)

(Daily Distance)

(5)

(Except E512)

(Total Distance Bike1)

(Except E512, E517C)

(Total Distance Bike2)

(Except E512, E517C)

(Total ODO)

In clock mode

Press

and hold "SET" key

for 3 seconds to go

setting clock.

Press "SET" key once

to adjust 12/24 hours.

Press "MODE" key to adjust time (hour, minute and second).

Adjustable

Hold "MODE" key for 3 seconds to go back to Clock Mode once the setting is finished.

TM MODE (Trip Time Mode)

Trip Timer would operate automatically when the bike is in motion.

How to reset all data (Kcal, TM, AVS, MXS, DST)

Press and hold "SET" key for 3 seconds,all exercises results in displayer will return to

zero, except odometer.

1~5mm

Note: If trip time runs over 30 hours, the display will repeatedly flash for 5 seconds and return to zero.

Green light

Speed

sensor

Cadence sensor

AVS MODE (Average Speed Mode)

The average speed

from the beginning

onwards.

(Except E512, E517C)

The odo accumulated

from bike 1

E517C, E520C, E526AC

Note:Odometer mode will return to zero after changing new battery.

Under ODO Mode, press "SET" key for 3 seconds to go to setting.

Press "MODE" key to go to temperature scale setting, Press "SET" key to select ℃or ℉.

(Average Cadence)

(Option in E517C, E520C, E526AC)

(Max Cadence)

(Option in E517C, E520C, E526AC)

M>3SEC

(Option in E523A, E526AC)

A. CAD (Average Cadence Mode)

(Option in E523A, E526AC)

(Option in E517C, E520C, E526AC)

(Option in E523A, E526AC)

Average cadence (pedals

AUTO SCAN

revolution per minute)

(Except E512, E516T)

from the beginning

onwards.

S>3sec

T. CLIMB MODE (Trip Climb Mode)

It indicates the current climbing value for the trip.

How to clear the climbing value

Under the T. CLIMB mode, press "SET" for 3 seconds to clear the data.

The display will show CLEAR and automatically return to zero after 3 seconds

T. ALT MODE (Total Altitude Mode)

It displays the total altitude value of bike1 + bike2

How to adjust actual altitude

Under T. ALT. mode, press "SET" key for 3 seconds to go to altitude setting.

Input the actual altitude data by pressing "SET" key.

Press "MODE" key to go to home altitude setting,

Input the home altitude data by pressing "SET" key.

Press "MODE" key to go to altitude bike1 setting,

Input the altitude bike1 data by pressing "SET" key.

Press "MODE" key for 3 seconds back to T. ALT. Mode.

S>3SEC

MXS MODE (Maximum Speed Mode)

M>3sec

The maximum speed

from the beginning

onwards.

(Option in E523A, E526AC)

Home Setting

It features and indicates the actual altitude of your start location.

In any mode, press and hold both "SET" key and "MODE" key for 6 seconds to automatically set

(Except E512)

default data of altitude.Note: keep pressing and hold both "SET" key and "MODE" key for another

DAILY MODE (Daily Distance)

3 seconds to automatically to go to ID scan.

It measures the running

distance in a day.

KCAL MODE (Calories Mode)

Note:The measurement will

It displays the accumulated calories consumed from the beginning of the trip onwards.

automatically return to zero when

How to input gender, weight scale and weight.

Press "SET" key for 3 seconds to go to KCAL setting. Press "SET" key again to select Kg or Lb.

passing every 12:00 and 24:00

Press "MODE" key to go to weight setting, Input your weight by pressing "SET" key.

o'clock.

Press "MODE" key to go to gender setting, Press "SET" key to select Female or Male.

Press "MODE" key for 3 seconds back to KCAL MODE.

(Except E512, E517C)

The odo accumulated

from bike 2

S>3SEC

M. CAD (Maximum Cadence Mode)

(Option in E517C, E520C, E526AC)

Maximum cadence (pedals

revolution per minute)

from the beginning

onwards.

(Option in E523A, E526AC)

S>3SEC

(Option in E523A, E526AC)

S>3SEC

M>3SEC