Easypix GoXtreme WiFi Pro Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Aparat cyfrowy Easypix GoXtreme WiFi Pro. Easypix GoXtreme WiFi Pro 2 stron.
Drukuj stronę
Shoot Photos By Time Lapse Mode
This feature allows you to continuously capture photos with
one press of the Shutter button at the preset interval time
(1/3/5/10/30/60 seconds). Shooting only stops when the
Shutter button is pressed again.
You can use this feature to record videos such as evolution of a
construction project, weather changes, or flower blossom.
For Video lapse function, those continuous shots are combined
and saved into one video automatically. The recorded video is
played back in fast motion (faster than the normal playback
speed).
For Photo lapse function, it will continuously capture 16M
photos and you need to use a third party software to create a
video clip.
1. Press the Mode button repeatedly to switch to Time Lapse
mode.
2. Press the Shutter button to start taking photos.
100
1S
LAPSE
90%
REC
3. Press the Shutter button again to stop taking photos.
00:00:02
1S
0002
LAPSE
90%
STOP
How to Use the Accessories
Waterproof Case
1. Release the case lock and flip it
open.
2. Install the camera inside the case.
3. Secure the case lock.
T Tip Adapter
Depending on the accessories that you
will use, detach or attach the T tip for use
with the accessory of your choice.
Loop Recording
This feature allows you to continuously record the video until
the memory card storage is full or the recording is manually
stopped. The system will automatically save one video file
every 1 minute of recording.
1. Press the Mode button repeatedly to
change to SET mode.
SETUP
MORE
2. Press the Shutter button to enter SET
SEL
mode.
3. Press the Shutter button to enter the SETUP menu.
4. Press the Mode button to highlight
LOOP.
5. Press the Shutter button to enter the
SEL
LOOP
LOOP submenu.
6. Press the Mode button to select ON
OFF
ON
and press the Shutter button to
confirm.
SEL
LOOP
100
7. Press the Shutter button to start
recording.
90%
8. Press the Shutter button to stop
recording.
90%
Housing Back Door
1. Open the back door completely.
2. Pull to detach the back door
from the case.
3. Install the T tip adapter to the
back door you want to use.
4. Re-install the back door.
Velcro Strap
You can insert the Velcro strap
through the strap holes of the T tip
adapter.
Other Accessories
Lock the T tip adapter to the T tip of
the accessories you wish to use.
Tips on attaching adhesive mounts
• Apply to clean surfaces - wax, dust, and
oily essence free.
• Attach the mount at room temperature.
• Mount only on smooth surfaces. To obtain
optimum adhesion, firmly press into place
when installing the mount.
• It is highly recommended to attach the
mount a minimum of 24 hours before
its initial usage.
View Videos/Photos
Connect your camera to a PC or TV to view captured photos and
videos.
OK
OK
Note: Use USB cable for PC.
OK
or
REC
STOP
Note: Use HDMI cable for TV. HDMI cable is an optional item.
RF Watch Remote Control
1. Press the Mode button repeatedly to
change to SET mode.
2. Press the Shutter button to enter SET
mode.
3. Press the Mode button to highlight
MORE.
4. Press the Shutter button to enter the
MORE menu.
5. Press the Mode button to highlight BINDING.
6. Press the Shutter button to enter the BINDING submenu. The
camera RF antenna is enabled and ready for pairing.
RF
SEL
BINDING
OK
7. On your RF watch remote control, press the MODE button to
switch to Preview mode. Then press and hold the SET button to
enter to SET mode.
MODE button
LEFT button
VIDEO button
View Videos/Photos on
Smartphones
Connect your camera to a smartphone using Wi-Fi connection to
view or record videos/photos from your camera on your
smartphone.
Note: Before using this feature, download the ActionCam! app
from AppStore (iOS) or Google Play (Android OS) on your
smartphone.
1. Press the Mode button repeatedly to
switch to WiFi mode.
2. Press the Shutter button to toggle WiFi
to ON.
3. Press the Mode button to exit the WiFi
mode screen.
4. Wait for 30 seconds until the LED flashes to indicate Wi-Fi
connection is established.
5. On your smartphone, enable Wi-Fi connection, then search and
connect to the Wi-Fi network ActionCam_xxxxxx.
6. When prompted, enter the password "1234567890".
7. Use the ActionCam! app to view videos and photos from your
camera.
8. Use the LEFT or RIGHT button to select Pairing and press the
VIDEO button to enter Pairing menu.
SET
9. Use the LEFT or RIGHT button to select the preview window that
you want to pair with your camera and press the VIDEO button
SETUP
to start pairing.
OK
SETUP
MORE
SEL
OK
* Best distance 3~5 cm
10. When pairing is complete, press the SET button to return to SET
mode. Then press the SET button to switch to Preview mode.
STOP
11. Press the VIDEO button on your RF watch remote control to
start and stop video recording. To take photos, press the
PHOTO button.
Please use microSD cards up to 32GB, minimum Class6 (not included).
Recording times are depending on resolution.
Before using your camera in the water please verify that all lids and locks are tightly
PHOTO button
closed and sealed on the camera and the underwater case. After use, clean the
housing of salt and chlorine water and then let it dry.
SET button
The camera should not be exposed to large temperature and humidity di erences to
avoid condensation inside the housing or behind the lens. After underwater use, the
case must be kept open to avoid condensation or rust.
RIGHT button
DECLARATION OF CONFORMITY
easypix herebly declares that the product GoXtreme WiFi Pro is in conformity to all the essential requirements of Directive
1999/5/EC. The declaration of conformity can be downloaded here:
http://www.easypix.info/download/pdf/doc_goxtreme_wi _pro.pdf
For technical help please visit our support area on www.easypix.eu.
OFF
WiFi
ON/OFF
ON
WiFi
ON/OFF