dibea BX-350 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz dibea BX-350. dibea BX-350 4 stron. Cordless handheld vacuum cleaner

Main accessories

Long crevice

This long crevice is suitable for cleaning on fabric, into tight corners and other hard-to-

reach spots.

Firmly insert the crevice tool into the nozzle of the vacuum until it snaps into place.

Bristle brush

It can clean books or small objects, such as frames, lampshades, keyboards etc.

Firmly insert the bristle brush into the nozzle of the vacuum until it snaps into place.

Bristle Brush

Dust Cup

Long Crevice

Motorized Head

Short Crevice

Switch Button

Power Light

Dust Cup

Release Button

HEPA

Charging Base

Charger

Place the charging base

This rechargeable vacuum cleaner comes with a charging base. Please place the base at

a suitable position.

Put it at a dry place close to the socket.

1.Place the charging base and fastener on the ground or on the table.

2.Place the base at the suitable place and remark the position of boring a hole.

3.Fasten the base with screws at place.

※ Attention!

Before installing or disassembling the product, make sure that the charger plug is pulled

out of the socket!

Battery charging

Put the vacuum cleaner on the base for charging as showed below.

1.Place the vacuum cleaner horizontally on the base.

2.Insert the charger into a 220V-50Hz socket.

3.When the red indicator light flashes, it means that the vacuum is being charged

properly.

It takes 4-5 hours to fully charge the vacuum. After fully charged, the red light will turn

on. The vacuum cleaner won't work when charging. When discharging, the green light

will turn on and the error light will turn off.

※ Attention!

To avoid damage, please only use the charger in the original package, or chargers of the

same technical parameters. Charge the unit completely for 12 hours prior to first use.

After fully charged, pull out the charger from the socket to protect the battery.

(A)