DiBiQuadro MercuryRec Podręcznik użytkownika - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz do instrumentów muzycznych DiBiQuadro MercuryRec. DiBiQuadro MercuryRec 19 stron.
Również dla DiBiQuadro MercuryRec: Podręcznik użytkownika (14 strony)
Drukuj stronę
MercuryRec_028_100W_6L6_M212_V30_57_A12C_B
MercuryRec_028_V_100W_6L6_M212_V30_57_A12C_B
MercuryRec_029_100W_6L6_M212_V30_201_A12C_B
MercuryRec_029_V_100W_6L6_M212_V30_201_A12C_B
MercuryRec_030_100W_6L6_M212_V30_421_A12C_B
MercuryRec_030_V_100W_6L6_M212_V30_421_A12C_B
The power amp is a 100Watt 4x6L6
tubes. Letter V stands for Vintage mode
(Presence
control
feedback).
Two cabinets are avaible: slanted 60A
loaded with T75s and V30s and M2x12
loaded with a V30 and a T75. A
sequential number from 1 to 4 indicates
which speaker has been sampled: 1
and 2 are the top left and right while 3
and 4 the bottom left and right
respectively.
A hi-end mic preamps was used: A12C
is a top notch preamplifier that set the
standard for modern recordings.
All Pwr/Cabs are phase aligned (with
the sole exception of the power amp
Pwr/Cab).
PWR/CAB LOAD. Pwr/Cab Load gives
access to the 8 slots on the GUI. Browse
opens
the
window
Pwr/Cab path, while Void cleans up
the slot. When a slot is void the output is
taken directly from the preamp if
enabled. The output of a Pwr/Cab is
limited to 0dB; the output of the
preamp is not limited and it can be
used to drive another plugin following
in the chain.
in
the
negative
to
select
the
Pwr/Cab LOAD window
PWR/CAB SET. With Pwr/Cab Set you
can select the number of harmonics in
the Pwr/Cab section:
-
Standard: 10 harmonics
-
High: 20 harmonics
-
Ultra: 30 harmonics
-
Non-Plus-Ultra: 40 harmonics
Pwr/Cab SET
14