EasyPro TB Series Instrukcja obsługi
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna EasyPro TB Series. EasyPro TB Series 2 stron. Waterfall pumps
Również dla EasyPro TB Series: Instrukcja obsługi (2 strony)
Drukuj stronę
Replacement Parts
9
5
4
10
8
No.
Description
Material
1
Cord
B Series Pumps
2
Motor Casing
Stainless Steel 304
3
Motor Cover
Die Casting FC-200
4
Bearing
NBR
5
Motor Shaft
Stainless Steel 403
6
Mechanical Seal
Silicone Carbide & Ceramic
7
Impeller
Die Casting FC-200
8
Pump Base
Die Casting FC-200
9
Handle
Stainless & NBR
10
Discharge
PE & Die Casting FC-200
Limited Warranty:
1
• Pump is warranted against any
mechanical or material defects for
a period of two years from date of pur-
chase
3
• This warranty does not cover acci-
dental damage to the product due to
abuse or negligence by the consumer.
2
• An RMA number must be obtained by
calling EasyPro Pond Products at 800-
448-3873 and be included on package
6
before returning for warranty.
Return warranty items to:
EasyPro Pond Products, 4385 East 110th, Grant, MI 49327
7
Be sure to include RMA number, original receipt, name, return ad-
dress and phone number in package.
• In the event of a warranty claim, please return the pump postage
prepaid with the original receipt for repair or exchange. No warranty
claims will be honored without the original receipt.
• The manufacturer or supplier shall not be held liable for any damag-
es caused by defective components or materials of this pump; or for
loss incurred because of the interruption of service; or any conse-
quential/incidental damages and expenses arising from the produc-
tion, sale, use or misuse of this product.
• The manufacturer or supplier shall not be held liable for any loss of
fish, plants or any other livestock as a result of any failure or defect
of this product.
• This pump must stay submerged entirely when operating. If used
in skimmer, the debris net must be kept clean to ensure adequate
water flow to the pump. Running pump low on water will cause over-
heating and premature failure which is not covered under warranty.
• If you experience a failure of your pump, please check the following
before returning to us:
1. Remove filter housing, clean and inspect impellar and surrounding
chamber, reassemble and test pump;
2. Verify electrical supply.
www.easypropondproducts.com • [email protected]
Return warranty
pumps to:
EasyPro
Pond Products
4385 East 110th
Grant, MI 49327
Be sure to include RMA
number, original receipt,
return address and phone
number in package!
800-448-3873 • Grant, Michigan
TB8000 • TB8002 • TB12000 • TB14500
High Head
TB Series Waterfall Pumps
Instructions for Operation • Safety • Warranty
Designed for use with higher head pressure
Thank you for purchasing the TB series waterfall pump.
This instruction manual explains the product operations
and gives important precautions regarding its safe use. In
order to use the product to maximum benefit, be sure to
read the instructions thoroughly and follow them carefully.
Specifications
•
3" outlets
•
Automatic thermal overload protection
•
Double silicone carbide mechanical seals with
100,000 hour life expectancy
•
TB8000 available as 230v or 115v, TB12000 and TB14500 available
as 230v only
•
Two year limited warranty
•
A minimum of 20' head pressure required for TB12000 abd TB14500
70'
60'
50'
40'
30'
20'
10'
0'
GPH
1000
2000
3000
4000
5000
6000
|
|
|
|
GPM
20
40
60
80
100
Beyond operating capacity
5454 • 5/16
7000
8000
9000
10000 11000 12000 13000 14000
|
|
|
|
|
|
|
120
140
160
180
200
220
Best efficiency