HTC 400 DS Podręcznik użytkownika - Strona 31

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Maszyna podłogowa HTC 400 DS. HTC 400 DS 38 stron.

HTC 400 DS

Tip!

Recondition all the grinding holders at the same time.

5.5. Every month (or 100 hours)

•

Any repairs that may be required must be carried out by a HTC

Service Centre, which has trained service personnel and uses

HTC original parts and accessories. Contact your retailer if your

machine requires servicing. For contact information, see Contact

Information at the start of the manual.

To ensure rapid delivery of spare parts, always specify the model,

the machine's serial number and the spare part number when

ordering. Information on the model and serial number can be found

on the machine's name plate.

Information on spare part numbers can be found in the machine's

spare parts list which is available to read or print out from the

accompanying digital media or HTC's website:

www.htc-floorsystems.com

Only original tools and spare parts from HTC may be used.

Otherwise neither the CE marking nor the warranty will be valid.

2.0

Tighten anything that may have vibrated loose.

Remove the grinding cover and check that it is

undamaged.

Scrape and vacuum-clean the parts shielded by the grinding

cover.

Test run and listen for any dissonance from the bearings.

Maintenance and repairs