HTC 650 HDX Podręcznik - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik dla Maszyna podłogowa HTC 650 HDX. HTC 650 HDX 40 stron.
Również dla HTC 650 HDX: Podręcznik użytkownika (48 strony)
Drukuj stronę
HTC 650 HDX
1
Introduction
1.1
General
The HTC 650 HDX is a grinder that can be used to grind, strip, clean and polish
concrete, natural stone and terrazzo floors. The machine's area of application depends
on the choice of tool.
Read the manual carefully, so you are totally familiar with the machine before you start
to use it. Contact your local retailer for further information. For contact information, see
Contact Information at the start of the manual.
1.2
Liability
Even though every effort has been made to make this manual as complete and accurate
as possible, we bear no responsibility for incorrect or missing information. HTC
reserves the right to change the descriptions contained in this manual without prior
notice.
This manual is protected by the Copyright Act and no part of it may be copied or used
in any other way without the written approval of HTC.
1.3
Manual
In addition to the general functions, this manual deals with the areas of application and
the maintenance of the grinder.
1.3.1
Safety explanations - explanation of symbols
A number of symbols are used in the manual to highlight the most important sections,
see below. It is important that you carefully read through the descriptions of the symbols
in order to avoid the risk of both material damage and personal injury. There are also
other symbols indicating practical tips. These are to help you use the machine in the
easiest and most effective way.
The following symbols are used in the document to indicate where special attention is
needed.
Warning!
This symbol means Warning! and indicates a risk of personal injury or material
damage in the event of incorrect use of the machine. If you see this symbol next
to a section of text, you must pay particular attention when reading through the
text and not carry out any operations of which you are unsure. This is for your
own and other users' safety and to avoid damage to the machine.
3.0
Introduction
1