HTC 800 Classic Podręcznik - Strona 22
Przeglądaj online lub pobierz pdf Podręcznik dla Maszyna podłogowa HTC 800 Classic. HTC 800 Classic 36 stron.
Drukuj stronę
Usage
4.5.2
Changing grinding tools
1. Remove the grinding tool by giving it a few light taps with a rubber hammer so
the locking mechanism releases,
up out of the guide slot.
Figure 4-5. Removing grinding tools
2. Slide the grinding tool diagonally, from above, down into the appropriate guide
slot on the tool holder,
the guide slot.
3. Lock the grinding tool into the tool holder by giving it a few light taps with a
rubber hammer - see
4.6
Preparations for dry grinding
Warning!
Check that the splash guard is fitted.
16
see Figure 4-5, page
see Figure 4-3, page
Figure 4-4, page
15.
HTC 800 Classic
16. Then draw the tool
15. Then push the tool fully into
1.0