EasyPro RGBC6 Instrukcje obsługi, bezpieczeństwo, gwarancja
Przeglądaj online lub pobierz pdf Instrukcje obsługi, bezpieczeństwo, gwarancja dla Kontroler EasyPro RGBC6. EasyPro RGBC6 4 stron. Controller for rgbw color changing lights with digital timer and remote control
Drukuj stronęRGBC2 • RGBC4• RGBC6
for RGBW Color Changing Lights
with Digital Timer and Remote Control
Instructions for Operation
Thank you for purchasing the controller
for RGBW color changing lights from
EasyPro. These controllers will power
up to 2, 4 or 6 color changing LED lights
Controller Features and Includes
•
Weatherproof with mounting holes
•
Built in digital timer
•
Remote control with 1000' range
•
Built in voltage regulator for adequate voltage for lights up to 300' away
•
115 volt input with 24v DC output
•
Pigtail with 5 pin receptacle and quick connect end.
Safety and Electrical Connections
1.
Always disconnect the electrical supply before handling, maintaining,
repairing or installing any pond equipment.
2. Do not open the controller. There are no serviceable parts inside the
controller.
3. Connect the 110 volt plug of the RGBW controller/transformer to a 110 volt
receptacle that is protected by a Ground Fault Circuit Interrupter.
4. Do not modify wiring in any way, quick plug ends must stay intact to
function and should not be replaced with any other connections.
5. Do not use with swimming pools or spas.
6. Only connect to matching 5 pin RGBW cords, splitters and RGBW lighting
fixtures.
7. All electrical work must be performed by a qualified technician. Always follow
the National Electrical Code (NEC) or the Canadian Electrical Code as well as
all local, state and provincial codes. Failure to follow manufacturer's installation
instructions may result in electrical shock, fire hazard, personal injury or
death, damaged equipment, provide unsatisfactory performance and will void
manufacturer's warranty.
Controller
Safety • Warranty
depending on the model.