Bionaire BAP412 - 2 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oczyszczacz powietrza Bionaire BAP412 - 2. Bionaire BAP412 - 2 19 stron.
Również dla Bionaire BAP412 - 2: Instrukcja obsługi (2 strony)

Drukuj stronę

BAP412I06MLM1 visual.qxd

11/7/06

11:23

Page 4

BAP412

Figure 1

Figure 3

U.K. and IRELAND

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS.

With proper care and use, this Bionaire

air purifier will give you fresh, clean air

Figure 2

for many years.

NOTE: Before reading these instructions, please

view the corresponding illustrations.

DESCRIPTIONS (SEE FIG. 1-2)

A. Inlet Grill

B. Washable Foam Pre-Filter

C.HEPA/Carbon Filter

D. Filtered Air Outlet

E. Ionizer Light

F. Ionizer Control

G.Speed Control

SAFETY PRECAUTION

Carefully read and retain all instructions before

using the air purifier.

• To avoid fire or shock hazard, check that the

voltage on the product corresponds to your

electricity supply and plug directly into an

electrical outlet.

• To avoid fire hazard, never put the cord under

rugs, or near any heat source.

• Carefully discard any plastic wrapping that was

used for the packaging.

• Do not use the air purifier outside.

• Do not place the unit near any heat source or

in direct sunlight.

• Always unplug the air purifier before removing

Figure 4

the grill, changing the filters, cleaning the air

purifier or whenever it is not in use.

• Do not use in or around water or any other liquids.

Do not attempt to wash the unit under running

water.

• Use appliance only for intended household use

as described in this manual.

• Ensure that all air openings are not restricted

or covered in any way.

• Do not place anything on top of the unit.

• Never insert any object into any openings.

• Do not use the air purifier if any part is missing

or damaged in any way.

• Do not attempt to repair or adjust any mechanical

functions of this unit. If the unit becomes damaged

return to the place of purchase or phone the

helpline number on the back of this leaflet.

• If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its service

agent or a similarly qualified person in order to

PRE-OPERATING INSTRUCTIONS

avoid hazard.

• The air purifier contains no user serviceable

1. After removing the unit from the box, remove

parts and should the product suffer damage or

the plastic covering from the unit.

breakdown it must be returned to the manufacturer

2. Select a firm level place where there are no

or its service agent.

obstructions to the air inlet (front grill) or filtered

• Should the air purifier stop working, first check

air outlet.

the fuse in the plug (UK only) or fuse/circuit breaker

3. Remove the inlet grill by pulling the grill towards

at the distribution board is operating, before

you.

contacting the manufacturer or service agent.

4. Remove both HEPA filters by gripping on both

sides and pulling forward.

HOW THE AIR PURIFIER WORKS

5. Remove protective plastic bag from each filter

Dirty, dust laden air is drawn through the back of

cartridge. The filter clip can only be attached to the

the air purifier and through the multi-stage filtration

hang tabs on the filter one way (see Figure 3). The

system.

filter clip should easily slide onto the filter hang

1. The carbon filter will help clear odours making

tabs. Do not use force whilst attaching the filter clip

the air cleaner and fresher.

to the filter. Align the clip on the HEPA filter with the

2. The HEPA filter entraps 99% of all smaller visible

rails on the inside of the unit. (see Figure 4)

and non-visible particles down to 2 microns in

NOTE: The pleated material and rubber gasket

size.

should be facing towards the unit when applied.

PRODUCT FEATURES

6. Replace the inlet grill by sliding back on to the

unit. Make sure that it snaps securely into position

Ioniser

(the grill only goes on one way).

Your Bionaire

Air Purifier has an independently

NOTE: Do not point outlet towards wall.

controlled ioniser, which when turned on, releases

OPERATING INSTRUCTIONS

negative ions into the outgoing filtered air. Ions

are tiny particles that carry either a positive or

1. Plug into a suitable 220 – 240V electrical outlet.

negative charge. These ions exist naturally all

2. Select the required operating Speed: Hi (

around us in the air, water and ground. Both positive

Medium (

and negative ions are colourless, odourless and

to the appropriate setting.

completely harmless.

3. To release negative ions into the filtered air,

Negative ions help the air purification process by

slide the Ioniser button (

attaching themselves to very small airborne particles

light will illuminate.

in the room. These particles take on a negative

4. The ioniser will not work unless the unit is running.

charge and may join with positively charged particles,

5. For optimum air filtration, it is recommended to

such as dust, pollen, smoke and pet dander to form

operate the air purifier continuously. Its rugged

larger particles that are then more readily captured

motor is designed to give many years of service.

by the filter system, or they may be attracted to

positively charged surfaces like walls or floors.

6. For continuous use, it is recommended to

operate the air purifier at the Medium (

You may also note, after extended use, that dust

setting. For quieter operation or use in a

may have collected around the grills or front panel.

bedroom, select the Low (

This is from the ionisation effect caused by the

high levels of air pollution are present, select

negative ions exiting from the air outlet.This dust

the Hi (

does not come from the air output, but is drawn

filtered air.

out of the uncleaned air going past the air outlet.

CLEANING AND MAINTENANCE

This is additional evidence of the air cleaning

effectiveness of negative ions. The dust can be

1. Turn the air purifier off and unplug it before cleaning.

easily removed with a clean, dampened cloth or

2. The outside of the air purifier can be cleaned

soft brush.

with a soft, clean dampened cloth.

NOTE: it is important to change the HEPA filter

3. The filtered air outlet can be cleaned of dust

at recommended intervals. Using the ioniser in

with a small, soft brush.

conjunction with dirty filters may result in dirty

4. If you wish to clean the inside of the air purifier,

particles exiting the air purifier and being attracted

please only use a dry, soft cloth to wipe it down.

to walls, carpets, furniture and other household

objects. These dirty particles may prove very difficult

FILTER REPLACEMENT

to remove.

IMPORTANT: IN ORDER TO RETAIN THE

EFFICIENCY OF YOUR AIR PURIFIER, THE

HEPA FILTER NEEDS TO BE CHANGED EVERY

6 MONTHS.

NOTE: Your air purifier has a filter condition sticker

that servers as a colour coded reference point.

1. Every few weeks check the condition of the

pre-filter.

2. Remove the inlet grill. If the foam pre-filter has

collected a noticeable amount of dust, remove

it from the inlet of the grill and wash it in warm

soapy water. Rinse and dry the pre-filter thoroughly

before replacing it in the inlet of the grill.

3. With the inlet grill removed, remove the HEPA

cartridge and dispose in the dustbin. DO NOT

try to wash and re-use the HEPA filter. Replace

with a new HEPA filter-BAPF30 removing the

protective plastic bag before inserting into the

air purifier.

4. Align the clips on the side of your HEPA filter with

the rails on the inside of the unit. Gently slide

the filter onto the rails.

5. The filter clip should easily slide onto the filter

hang tabs. Do not use force while attaching the

filter clip to the filter. Align the clip on the side of

your HEPA filter with the rails on the inside of

the unit.

NOTE: The pleated material and rubber gasket

should be facing towards the unit when applied.

6. Replace the inlet grill by sliding back on to the

unit. Make sure that it snaps securely into position

), Low (

) by sliding the switch

(the grill only goes on one way)

NOTE: Do not point outlet towards wall.

) to ON. The amber

REPLACEMENT FILTER

BAPF30 HEPA Filter (usage 1 pc)

Holmes Products Europe reserves the right to

change or modify any specifications without notice.

TROUBLESHOOTING

)

Problem

Solution

) setting. When

Unit will not operate. Check to make sure the unit

is plugged in.

) setting to quickly circulate clean

Check to make sure the unit

is on by turning the knob.

Make sure the filters are

properly installed and firmly

close the door.

Decreased airflow.

If the filters have not been

changed for 6 month or more,

change the HEPA filters.

Check to ensure nothing is

blocking the air inlet and

filtered air outlet.

Noise

Make sure filter bags are

removed if present.