Alpha ESS HV50056 Instrukcja szybkiej instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Falownik Alpha ESS HV50056. Alpha ESS HV50056 10 stron.
Drukuj stronęMounting Bracket
Step8
Use impact drill (bit φ 8.0mm, length
20cm) to directly drill at the marking
positions of the hangers and the hole
depth should be about 7 cm.
3
5
Screw package：
Expansion tube (X 3)
Gasket (X 3)
Expansion screw (X 3)
Installation Of HV50056
Step9
Hang the HV50056 onto the rear bracket .
Wiring
Step10
Rotate the waterproof connector counterclockwise according to
1
the installation procedure to remove the plug.
Use a screwdriver to remove the maintenance cover before
2
doing wiring.
The battery has no air switch
3
protection. Please be careful not to
short the positive and negative poles
during installation.
4
Make sure the waterproof joint seal
is inserted into the plastic claw ring
during installation.
Note：Pack the PE bag on
the battery to prevent dust
before punching.