Alpha Fan AX838-5B/42 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Alpha Fan AX838-5B/42. Alpha Fan AX838-5B/42 7 stron.
Drukuj stronę
TRANSMITTER FUNCTION
Fan Speed
1 - Lowest speed
5 - Highest speed
Timer On
1h - Fan turns on after 1 hour
3h - Fan turns on after 3 hours
6h - Fan turns on after 6 hours
8h - Fan turns on after 8 hours
Last Memory Function
The Transmitter & Receiver is incorporated with last memory function. It stores the last reading/setting on
memory and when the fan is switch on again, the operation will be as the last memory/setting.
POWER SUPPLY CONNECTION
IMPORTANT : DO NOT CONNECT THIS REMOTE CONTROL CEILING FAN TO DIMMER
SWITCH OR REGULATOR.
Regulator
Power
Turn off fan
Natural Wind
Fan speed changes within
its range creating gentle
sea-breeze effect
Dimmer Switch
9
CIRCUIT DIAGRAM
IMPORTANT : DO NOT CONNECT THIS REMOTE CONTROL CEILING FAN TO DIMMER
SWITCH OR REGULATOR.
Thermal
Fuse
(Inside
Motor)
To Fan L
Brown
L
Main
PCB
To Fan N
Blue
N
E
MAINTENANCE
Due to the fan's natural movement, connections may get loose after period of usage. To ensure a proper
and safety usage, it is highly recommended to inspect and tighten all connections every 6 months.
Cleaning
Cleaning your fan periodically will prolong its new appearance. Basic cleaning procedures
are as follows :
1. Use only water and mild soap. Do not use solvents, corrosive or acidic solution.
2. Damp the cloth lightly. Use only soft or lint-free cloth to clean the fan. Rough fabric will
scratch the surface.
3. Do not bent the blades while cleaning. At the event where blades are bent or damage,
order new set of blades from service center or dealer shop.
4. There is no need to oil the fan.
Motor
Motor
Capacitor
Blue
Grey
Blue
Orange
Yellow
10