dicodes Dani Extreme V2+ Podręcznik - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik dla Vaporizery dicodes Dani Extreme V2+. dicodes Dani Extreme V2+ 12 stron.
Również dla dicodes Dani Extreme V2+: Podręcznik (12 strony)
Drukuj stronę05 Main Menu (Page 4)
Switch Off Device
In addition to the Auto-Power-Off feature, the user can turn off the device manually. It
is recommended that the user turn off the device wait for auto-power-off, replacing the
battery in order to preserve the statistic counters. Otherwise the statistics collected
since the last power up will be lost. To switch off the device wait on this menu item until
the display of the 0 is inverted, then press the button.
Extended Functions Menu
The Extended Functions Menu has three sub-menus:
Heater Menu
Mod Menu
Value Menu
The Extended Functions Menu offers many setting options of the mod to
accommodate even the most discerning user. Once user preferences are set they
rarely need to be changed.
The more advanced settings were placed in the extended functions menu.
The large number of options may intimidate some users initially. But without the
extended functions menu the mod would not be able to address all different
customer requirements. Please take a bit of time to get familiar with the menu. We
are sure, as soon as you have gained an overview, setting your preferences will be
easy.
Error Messages
If an error occurs, the mod directly jumps to the error menu and displays the error
number and a mnemonic (short-term) description.
The possible error messages are:
0 OvrVolt:
The input voltage is too high. The DaniExtreme V2+ is engineered to
use a n 1 8 3 5 0 , 1 8 5 0 0 o r 1 8 6 5 0 battery depending on the make
of your device. If a different battery is used and the input voltage
exceeds 4.5V this error message will be displayed. Reduce the input
voltage to the specified range.
1 ChkAtom: No atomizer detected or open coil.
2 TempRef: A problem during the temperature reference measurement occurred
3 HighR:
The resistance of the coil is too high for the selected output power. The
maximum output voltage is 12V and current is 15A. This specification
together with a maximum output power of 40W leads to a resistance
range of 0.2-3.5 Ohms. Also see "8 LowR". Higher and lower resistances
are possible, but the power has to be reduced accordingly.
Example 1: With a 4Ohm coil the maximum power is (12V)²/4 Ohm=36W.
Example 2: With a 0.12Ohm coil the maximum power is (15A)²*0.12 Ohm
= 27W. Note that for resistances >3.5 Ohm the output voltage is the
limiting factor, whereas for resistances <0.2 Ohms it is the current.
4 OverCur: Short on coil or coil breakdown (open)
5 LowBat:
The battery voltage under load (with current drained from it) has reached
the minimum discharge level, defined with parameter UbatMin in the
extended function mod-menu.
6 EleHot:
The electronics have overheated and needs to cool down. This error
will not occur with normal usage of the mod.
7 TimeOut: The maximum puff-time is limited depending on power. For a power <20W
it is 20seconds. Above 20W it decreases by 0.5seconds per Watt.
8 LowR:
The coil resistance is too low for the selected power, please see "3 HighR".
Settings related to the heater or coil
Settings related to the individual usage and appearance
Provides several statistics of vaping