Alpha Image AMD2x-E Series Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera bezpieczeństwa Alpha Image AMD2x-E Series. Alpha Image AMD2x-E Series 2 stron. Ir dome camera

PRODUCT BRIEF
* * * * Sensor ( ( ( ( CMOS) ) ) )
SONY 1/3" CMOS Exmor sensor (1.3 Mpix).
* * * * Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. This camera
produces a high definition picture in low Lux condition.
* * * * Scanning Mode
PAL
* * * * Supports UTC-function: OSD menu can be set with
optional UTC (Up-The-Coax) controller ref. AMD1-UTC
* * * * OSD SETTING
3D-NR
AE MODE
IMAGE ENHANCE
IMAGE
MIRROR
FLIP
BRIGHTNESS
ZOOM IN
AUTO
DAY &
NIGHT
IR-CUT
AWB-PRO
OSD
AWB-TEMPORAL
SET
AWB-AI
WB
AWB-SZ
AWB-GW
AWB-CCT
MOSAIC/WHITE/YELLOW/
COLOR
CYAAN/GREEN/MAGENTA/
PRIVACY
MASKING
AREA NO. 0-7
MOTION
AREA NO. 0-4
DETECT.
ENGLISH
LANGUA-
GE
CHINESE
LOAD DEFAULT
SOFT VERSION
SAVE & EXIT
CONNECTING
KEY BOARD
UP
LEFT
ON/OFF
GLOBAL/CENTER/
CENTERWEIGHT/BACK
DOWN
LIGHT/FRONT LIGHT/
DISTINGUISH
TROUBLESHOOTING
SHARPNESS/CONTRAST/
SATURATION
ON/OFF
1. No Picture after providing power
ON/OFF
. Maybe your power supply is not a 12 VDC Device. Maybe the polarity +/- is
incorrect according to the schematic above.
0. 10. 20..... 250
. Please check if all the connections are made in a proper manner like in the
schematic above. Monitor, power supply and connectors with the appro-
50. 60. 70. 80. 90. 100
priate cabling according to the industry standard.
2. The picture level direction have flowing interference ripples
. May be caused by power supply AC ripples, it needs filtering of the waves of
the power supply. May be caused by ground loops.
. Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
. Fluorescent lamp's electromagnetic field causes color roll. This is a proper
phenomenon of cameras in general.
. Reduce the number of fluorescent lamps or increase the distance between
the camera and the fluorescent lamps.
. Use power supply external synchronisation.
4. Too much picture smear is seen in the image
. The power supply's voltage is unstable.
. Please check the connecting cables, maybe they are not well fitted.
RED/BLEU/BLACK
●The power supply must have a legal safety attestation. Its output
voltage, current, voltage polarity and operating temperature must
match the camera's requirement.
●When using the camera in bad wheather conditions (eg. lightning),pls
note to use a surge protection device or put out the PSU plug & cable.
●In order to produce high quality pictures, the power supply's cable and
video output cable should not be too long.
Monitor
AMD2x-E
MENU
Link wire rule:
RIGHT
Video
Power
PRESS
12 VDC Power Supply
Notes: : : :
INTRODUCTION
Congratulations on your purchase of this product.
This User Guide suits AMD2x-E product. We use the lat-
est SONY sensor and driver in this product. This camera
Video
is very small and robust, so it can be used in almost any
condition. In addition, it has a very high quality and stabil-
ity, strong anti-jamming, and produces rich and real colors.
Also the installation is very easy, you don't have to open
12 VDC
the camera to mount it and set it up, the setup is all done
externally.
Please read this instruction manual carefully to en-
sure proper use of the product.
To prevent fire or shock hazards do not expose the unit
to rain or moisture.
If you don't want to use this product or it is faulty, do not
throw it away. Please return it to your original supplier for
proper recycling or disposal. Think of the environment !
This symbol is intended to alert the user to the presence of
uninsulated 'dangerous voltage' within the product's
enclosure that may be of sufficient power to cause a risk
or electric shock to persons.
RISK OF ELECTRIC SCHOCK DO NOT OPEN
CAUTION:
SHOCK DO NOT REMOVE THE COVER OR BACK. THERE ARE NO
USER SERVICEABLE PARTS INSIDE. PLEASE REFER TO QUALI-
FIED PERSONAL IF THERE IS A PROBLEM WITH THE CAMERA.
CAUTION:
TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE AN OTHER THAN THE
SPECIFIED POWER SOURCE.
Note: : : :
● Please note the camera's operating temperature and its envi-
ronment requirement. Avoid using the camera at too high or too
low temperatures. The operating temperature is -30 ~ +60 C.
(Recommendatory operating temperature is -10 ~ +50 C.)
● Never make the camera face the sun or a very bright object. It
might damage the CMOS sensor.
● Don't mount the camera near any heating source (eg. radiator).
CAUTION:
TO REDUCE THE RISK OF ELECTRIC