Epcom EP-TB-4G Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Epcom EP-TB-4G. Epcom EP-TB-4G 12 stron. Triple band signal amplifier

d. View the Gain and Gain Attenuation Setting

First, select the frequency you want to set, according to precious guide of "c". Then press

"SET" button to light up "Gain UL" on the screen and uplink gain will be displayed on the right

side(as Figure 5). Press "INC+" or "DEC-" button to attenuate uplink gain(as Figure 6).

Similarly, press "SET" button, light up "Gain DL" on the screen(as Figure 7). Then press

"INC+" or "DEC-" button to attenuate downlink gain(as Figure 8).

Figure 7

e. Auto Stand-by Function

When uplink input signal is lower than -80dBm (no phone being used in the coverage

area), uplink signal output will be automatically shut off. "Work" at the left bottom of the screen

will light off while LED indicator "Run" will be flashing (as Figure 9). When uplink input signal is

higher than -75dBm(Using phone being detected), uplink will automatically restart and LED

indicator "Run" will light up(as Figure 10).

Figure4

Figure 5

Figure 8

Figure 6