Alpha Microsystems Eagle 250 Instrukcja serwisowa - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Pulpit Alpha Microsystems Eagle 250. Alpha Microsystems Eagle 250 20 stron.

Page 10

AM-966-10 CONNECTIONS

The Eagle 250 uses the AM-966-10 front panel display board, which connects to the AM-138. In most

cases, you should not need to connect any wires to or disconnect any wires from the AM-966. However,

if any of your front panel display lights stop working, or if one or more wires come loose from the AM-

966, you can refer to the picture and list below to check and, if necessary, remake any connections.

DWB0966-10 Rev xxx

WARNING!

The SSD chip and boot

PROM on the AM-138

board require a

specialized tool for

their removal. If you

attempt to remove

the SSD chip or

boot PROM using

a screwdriver or

pocketknife, you

could easily damage

both the chip and the

socket. This type of chip

extraction tool is available

at retail stores specializing

in electronic components.

PIN 1

THIS JUMPER MUST

BE IN THE TOP POSITION

Eagle 250 Service Manual

CABLE FROM AM-138

CONNECTOR P9

PLUGS IN HERE

EN26

TURBO RUN

DISK

JP3

EN20

RESET

JP4

TURBO SW

JP5

JP6

Rev. 01