Alpha Outback Energy AlphaNet DM3.0 Series Skrócona instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Monitor Alpha Outback Energy AlphaNet DM3.0 Series. Alpha Outback Energy AlphaNet DM3.0 Series 6 stron. Docsis status monitor
•
Local Web Server Access:
•
You may also test the connection using a computer and a standard Ethernet cable. Connect the computer
to the Ethernet port on the transponder, launch an Internet browser (e.g. Internet Explorer) and enter
192.168.100.1 in the address field. The General Configuration page shown below will appear and display
connectivity, power levels and power supply status information such as alarms, output voltage, output current
and individual battery voltages. System Name, System Location, System Contact and Common Logical ID
may be edited on this page; when prompted for a User Name and Password, use "Alpha" and "AlphaGet".
NOTICE:
If the home page of the DM3.0 Series Transponder does not load using IP address 192.168.100.1, the Local
Area Connection on the computer may require a Temporary Static IP address to be manually configured to
192.168.100.2
•
Remote Web Server Access:
•
Connect the computer to the cable modem network, launch an Internet browser (e.g. Internet Explorer) and
enter the designated transponder IP address in the address field. The General Configuration page will appear
(Fig. 8).
Worldwide Corporate Offices
Headquarter Germany
Hansastrasse 8
D-91126 Schwabach
Tel: +49 9122 79889 0
Fax: +49 9122 79889 21
Mail: [email protected]
Alpha and Outback Energy GmbH reserves the right to make changes to the products and information contained in this document without notice. Copyright © 2020 Alpha and Outback Energy GmbH. All
Rights reserved.
For more information please visit
Fig. 8, General Page
France and Benelux
Eastern Europe
Middle East
Spain
www.alpha-outback-energy.com
Russia
Africa
704-939-B1-001, Rev. A (09/2020)