EPH COMBIPACK3 Łatwa instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Łatwa instrukcja obsługi dla Termostat EPH COMBIPACK3. EPH COMBIPACK3 5 stron. Wireless non programmable thermostat
Drukuj stronę
RFRA - RF Room Thermostat
9. To connect the RFRA thermostat to the RF1 receiver
10. To disconnect the RFRA thermostat from the RF1
receiver
On the RF1 receiver
Press the reset button on the right side of the housing.
Within 2 seconds, press the connect button.
The RF1 receiver is now disconnected from the RFRA thermostat.
On the RFRA thermostat
Press the
button on the bottom of the thermostat, the front housing will
detach from the baseplate.
Press the RESET button on the printed circuit board.
"NO" will flash on the screen.
Rotate the hand wheel clockwise until "YES" appears on the screen.
Press the hand wheel once to confirm the setting.
The thermostat is now disconnected from the receiver.
EPH Controls Ireland
[email protected] www.ephcontrols.com
Page 2 of 2
Operating Instructions
EPH Controls UK
[email protected] www.ephcontrols.co.uk
20180628_RFRA_OpIns_JW