DieHard 200.713121 Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka DieHard 200.713121. DieHard 200.713121 16 stron. 12/2/75 amp fully automatic battery charger engine starter
Również dla DieHard 200.713121: Instrukcja obsługi (16 strony)
Drukuj stronęCharge Time Needed if Amp-Hours is Known
•
Find the Charge Factor for your battery in the table on page 11.
•
Multiply by the Amp-Hour rating of the battery.
•
Divide by the Charger Setting (either 2 Amp or 12 Amp).
•
Multiply by 1.25 to get the approximate Hours Needed to bring the battery to full
charge.
Example: 15 Amp-Hour (AH) Battery, 50% State-of-Charge,
[(AH x Charge Factor) ÷ Charger Setting] x 1.25 = Hours Needed
(15 x 0.5 ÷ 2) x 1.25 = 4.7 Hours
Charge Time Needed if Reserve Capacity is Known
•
Find the Charge Factor for your battery in the table on page 11.
•
Multiply by the Reserve Capacity rating of the battery.
•
Divide by the Charger Setting (either 2 Amp or 12 Amp).
Multiply by 0.73 to get the approximate Hours Needed to bring the battery to
•
full charge.
Example: 95-Minute Reserve Capacity (RC) Battery, 25%
[(RC x Charge Factor) ÷ Charger Setting] x 0.73 = Hours Needed
[(95 x 0.75) ÷ 12] x 0.73 = 4.3 Hours
To keep your battery charger working properly for years:
1. Clean the clamps each time you are
finished charging. Wipe off any
battery fluid that may have come in
contact with the clamps to prevent
corrosion.
2 Amp Charger Setting
State-of-Charge, 12 Amp Charger Setting
MAINTENANCE AND CARE
12
2. Coil the input and output cords neatly
when storing the charger. This will
help prevent accidental damage to
the cords and charger.