DieHard 28.71688 Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zdalny rozrusznik DieHard 28.71688. DieHard 28.71688 9 stron. Jump starter and ac/dc/usb power source
Drukuj stronę
PROBLEM
The Portable Power won't
power my 12V device.
The battery in the Portable
Power won't hold a charge.
The Portable Power's alarm
is on.
The inverter is on, but the
display only shows err.
or for information about troubleshooting or replacement parts,
Male-to-male accessory cable ................................................................................ 94500109
Air compressor accessory kit (3 hose adapters)................................................. 0099000599
POSSIBLE CAUSE
The 12V device is not
turned on.
The Portable Power's battery
is not charged.
The 12V device draws more
than 15A or has a short circuit.
The battery is bad (will not
accept a charge).
Connections are reversed.
The jump starter battery is not
fully charged.
The device is drawing more
than 400W or has a short circuit.
BEFORE RETURNING FOR REPAIRS
If the above solutions do not eliminate the problem,
call toll-free from anywhere in the U.S.A.
7:00 am to 5:00 pm CT, Monday through Friday
REPLACEMENT PARTS/ACCESSORIES
1-800-732-7764
• 9 •
REASON/SOLUTION
Turn on the 12V device.
Check the battery charge
status by pressing the button
on the front of the unit. See
DIGITAL DISPLAY section.
Contact a qualified service
technician, to replace the fuse.
Replace the battery.
Disconnect the jump starter
and reverse the clamps.
Recharge the unit.
Use only devices that draw
less than 3.3 amps of AC
current.