Olympus 120 - Stylus 120 Autofocus Point Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Aparat cyfrowy Olympus 120 - Stylus 120 Autofocus Point. Olympus 120 - Stylus 120 Autofocus Point 13 stron. Olympus digital camera user manual
Również dla Olympus 120 - Stylus 120 Autofocus Point: Specyfikacje (2 strony)

Olympus 120 - Stylus 120 Autofocus Point Instrukcja obsługi

FLASH PHOTOGRAPHY

12

Auto Flash

1
2
1. Press the shutter release button to
2. Press the shutter release
make sure the orange lamp lights.
button all the way to take
the picture.
Flash working range (with color negative film)
ISO
Wide angle (W)
100
0.6 to 4.5 m (2.0 to 14.8 ft)
0.6 to 2.0 m (2.0 to 6.6 ft)
200
0.6 to 6.3 m (2.0 to 20.7 ft)
0.6 to 2.8 m (2.0 to 9.2 ft)
400
0.6 to 9.0 m (2.0 to 29.6 ft)
0.6 to 4.0 m (2.0 to 13.2 ft)
Note: When slide film is used, the working range at the telephoto side
will be reduced by about 40%.
FLASH PHOTOGRAPHY

Red-Eye Reduction Flash

A series of low-power pre-flashes before the main flash
accustoms the subject's eyes to the light and helps prevent
their eyes from appearing red in a photograph.
Eyes appear red.
Hold the camera securely. It takes about 1 second until the shutter releases.
Red-eye reduction may not be effective when the subject:
1. Is not looking at the flash from right in front.
2. Is not watching the pre-flashes.
3. Is too far from the camera.
The effectiveness of red-eye reduction varies depending on the individual
characteristics of each subject.
2754 Q20N_EN
12-13
Use this mode in situations where flash photography is not
desired or is prohibited or in twilight or night scenes.
Closing the lens barrier restores the Auto Flash mode.
Telephoto (T)
Since a slow shutter speed (as low as 2 seconds) is selected, use a
tripod to prevent camera-shake.
Have your subject stay still; otherwise, blurring may result.
Use this mode to compensate for a shadow cast on the
subject's face or to shoot in backlit conditions or under
fluorescent light.
Closing the lens barrier restores the Auto Flash mode.
Make sure your subject is within the flash working range (p.12).
Fill-in flash becomes ineffective in extremely bright conditions.
FLASH PHOTOGRAPHY

Flash-Off

FLASH PHOTOGRAPHY

Fill-In Flash

02.11.18, 8:44 PM
13