Olympus 50 QD Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Aparat cyfrowy Olympus 50 QD. Olympus 50 QD 15 stron. Olympus instruction manual digital camera is-50, is-500

Drukuj stronę

LOADING THE FILM

Shutter curtain

Slide the back cover release

upward to open the back cover.

Place the film between the positioning guides

(A), aligning the film leader in the direction of

the arrow.

Close the back cover. The

film automatically advances

to the first frame. Set the

power switch to ON.

Insert the film cartridge.

Be careful not to touch the

shutter curtain.

Correct

Incorrect

Make sure the exposure

counter on the LCD panel

reads "

If "

" blinks, reload the film.

TAKING PICTURES

After about 30 seconds of inactivity, the LCD panel goes out.

Do not look at the sun or other strong light sources

through the viewfinder.

Position the autofocus frame

on your subject.

If the autofocus indicator

blinks, the shutter cannot be

released.

The distance to your subject

is 0.6 (2.0 ft) m to infinity at

the wide-angle side and 0.9

(3.0 ft) m to infinity at the

telephoto side.

— Programmed Auto (FULL AUTO)

Set the power switch to ON. The

lens will extrude and the LCD panel

will turn on.

Compose your shot. Press the "T"

side of the zoom button for

telephoto (120 mm) or the "W" side

for wide angle (28 mm).

Autofocus frame

Press the shutter release button

halfway to focus on the subject.

After making sure that the

camera beeps and the autofocus

indicator lights in the

viewfinder, press the shutter

release button all the way to

take the picture. After the

shutter is released, the film

automatically advances to the

next frame.