AXITEC AC-305MH/120S Instrukcja instalacji - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Falownik AXITEC AC-305MH/120S. AXITEC AC-305MH/120S 17 stron.

4.10.

Overcurrent protection type: None // Number of By-pass diodes: 3

4.11.

Diameter of cables. Every module has (2) cables whose diameter is 4mm

them, and it can endure 90℃ insulation and can be exposed under sun light.

Ways of connecting: Every module comes with (2) connectors and they are

respectively positive electrode and negative electrode. When modules are installed in

series, the first positive connector should connect with the negative connector of the

next module. The modules are equipped with PV wiring connectors that comply with

the Standard for Connectors for Use in Photovoltaic Systems, UL 6703, the specific

allowable mating connector manufacturer(s) and model number(s) are listed as

below, different model connectors should not be mated with each other.

Connector model name

PV-ZH202-SBN

TL-Cable01

PV-JM601

PV-ZH202B Series

TL-CABLE01S-FM

PV-JM601A

PV-JM608

PV-KST4-EVO2/6II-UR

PV-KST4/6II-UR

UTXCFA4AI, UTXCFA4AC or UTXCFA4AM

5. Operation and Maintenance

5.1.

No routine maintenance is required. However, it is advisable to perform periodic

inspection of the modules for damage to glass, back-skin, or frame. Check electrical

connections for loose connections and corrosion.

Installation Manual

Allowable mating connector model name

PV-ZH202-SBN

TL-Cable01

PV-JM601

PV-ZH202B Series

TL-CABLE01S-FF

PV-JM601A

PV-JM608

PV-KBT4-EV02/6II-UR

PV-KBT4/6II-UR

UTXCMA4AI, UTXCMA4AC or UTXCMA4AM

for each of

Page 14 / 16