Olympus DS-2000 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Rejestrator głosu Olympus DS-2000. Olympus DS-2000 44 stron. Dss player for mac os 9 instructions (english)
Również dla Olympus DS-2000: Instrukcja obsługi online (48 strony), Instrukcja obsługi (36 strony)

Drukuj stronę

Replacing Batteries

The battery indicator on the display changes

as the batteries lose power.

When the batteries are too weak, the recorder

shuts down and "BATTERY LOW" appears on

the display.

When

appears on the display, replace

the batteries as soon as possible. AAA alkaline

batteries* are recommended.

* The two AAA alkaline batteries provide

approximately 11 hours of continuous recording and

playback. Battery life depends on the operating

environment and other conditions.

Using the AC Adapter

Plug the optional AC adapter (Olympus Model

A321 or A322) into household power outlet and

connect the power plug to the recorder's power

connector (DC 3 V) as shown in the illustration.

Always stop recording before connection.

Otherwise it may not be possible to play back

the voice data being recorded.

Notes

• Be sure to stop the recorder before replacing

"BATTERY

LOW"

• Be sure to replace both batteries at the same time.

• Never mix old and new batteries, or batteries

• If it takes longer than 3 minutes to replace dead

• Remove the batteries if you are not going to use

• Always stop recording before connection

• When the AC adapter is not in use,

R E C

S T O P

E R A S

• Use only the correct power supply voltage

• Do not use the AC adapter when

the batteries. Unloading the batteries while the

recorder is recording, erasing or otherwise

accessing an audio file may corrupt the file.

of different types and/or brands.

batteries, the internal rechargeable backup battery

will be exhausted, so you may have to reset the

time when you load fresh batteries.

the recorder for an extended period of time.

or disconnection.

disconnect the power supply plug from

the power outlet.

as indicated on the adapter.

connecting the recorder to the USB port.