Olympus WS-210S Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Rejestrator głosu Olympus WS-210S. Olympus WS-210S 15 stron. Enregistreuer voval numerique
Również dla Olympus WS-210S: Instrukcja obsługi (11 strony), (Angielski) Instrukcje (15 strony), (francuski) Tryb zatrudnienia (15 strony)

Drukuj stronę

Power Supply

Slide the HOLD switch in the direction opposite that

indicated by the arrow.

➜

Power ON

The display will turn on and the power will be turned on.

The resume function will bring the recorder back to the stop

position in memory before power was turned off.

Slide the HOLD switch in the direction indicated by the

arrow while the recorder is not in operation.

➜

The display shuts off and the power will be turned off.

Power OFF

The resume function remembers the stop position before the

power is turned off.

Standby Mode and Display Shut Off

If the recorder is stopped for 5 minutes or longer during recording or playing, it goes

into Standby (power-save) mode, and the display shuts off. To exit Standby mode and

turn on the display, press any button.

Hold

Setting the HOLD switch to the direction of the arrow holds the current status, and all

button operations are disabled. This feature is useful when the recorder is carried in a

handbag or pocket. Remember to release the HOLD switch to use the recorder.

Notes

sSetting the HOLD switch to the direction of the arrow during playback will turn off the

display at the time when playback of the current file ends.

sSetting the HOLD switch to the direction of the arrow during recording will turn off the

display and finish recording at the time when the remaining recording time reaches to

zero.

Setting Time/Date (Time & Date)

If you have set the time and date, information as to when a sound file was recorded is

stored automatically with that file.

When using the recorder for the first time, or after the battery has been taken out for

a log period of time, the "year" indication will flash. In such a case, be sure to set the

time and date by following steps 4 through 6 described below.

Press and hold the

longer to go to the mainmenu.

Press the 9 or 0 to select the "Sub

Menu", and press t

"Time & Date" is displayed, and

Press the 9 or 0 button to select the item

to set.

Select the item from "year", "month", "day", "hour"

and "minute" with a flashing point.

Press the

Follow the same steps by pressing the 9 or 0

button to elect the next item, and press the

button to set.

Press the t button to complete the setup

screen.

The clock will start from the set date and time.

Press the t button according to the time signal.

Press the

This completes the time/date setup procedure.

sYou can choose between 12 and 24 hour display by pressing the

while setting the hour and minute.

sYou can change the order of the date indication by pressing the

while you are setting the year, month, or day.

sIf you leave the battery compartment disconnected from the recorder for a longer

period of time or if you remove the battery compartment repeatedly at short intervals,

you may have to reset the time.

(Example: June 14, 2007)

(MENU) for 1 second or

–

button to set.

button to close the menu mode.

- 4 -

flashes.

–

HOLD switch

(DISP.) button