Olympus BX-RLA2 Instrukcja obsługi - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus BX-RLA2. Olympus BX-RLA2 32 stron. Reflected light brightfield/darkfield illuminator

Drukuj stronę

Fig. 11

Fig. 12

Using the Joint Plate (Fig. 11)

...

When the U-AN360-3 analyzer ƒ and U-PO3 or U-POTP3 polarizer ... are

coupled by using the joint plate | provided with the polarizer and tighten-

ing the clamping knobs on it, the analyzer and polarizer can be engaged

or disengaged in the light path together.

Setting the DIC Slider

1. Loosen the mounting knob @ on the front of the DIC revolving nosepiece,

insert the DIC slider ² so that the surface with indication faces up, and

clamp by tightening the mounting knob.

2. With the U-DICR interference slider, set the slide lever ³ according to the

objective in use.

Lever ³ position

Pushed in

Pulled out

Applicable Objectives

UIS2

MPLFLN/MPLFLN-BD series

UIS

UMPlanFl/UMPlanFl-BD series

MPlanApo20X, 100X

MPlanApo100XBD

LMPLFLN/LMPLFLN-BD series

UIS2

LMPlanFl/LMPlanFl-BD series

UIS

LMPlanApo/LMPlanApo-BD series

(Fig. 12)