Olympus BX2 SERIES Podręcznik konserwacji - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik konserwacji dla Mikroskop Olympus BX2 SERIES. Olympus BX2 SERIES 29 stron. Olympus microscope bx2
Również dla Olympus BX2 SERIES: Informacje (6 strony)
Drukuj stronę
BX2 MAINTENANCE MANUAL
2-2 Cleaning method for the optical components
Required tools:
1) Lens tissue
2) Cotton swab or tweezers etc. 3) Blower
5) Cleaning solution: e.g. Alcohol
Before cleaning: Lightly brush the lens surface or blow with the blower before wiping with tissue.
This removes particles that may scratch the lens surface. (to protect the lens coating)
1
Moisten the tip of cotton
swab with cleaning
solution.
When the lens size is large and difference in
level between the lens and the lens frame is small:
Fold the lens tissue several times and moisten it
with cleaning solution.
After that, apply the folded line edge to the center
of lens, push it with index finger and turn the
objective by the other hand to clean the lens
while moving it from the center towards the
periphery.
MAINTENANCE PROCEDURE
4)Magnifier (Eyepiece is possible to be used by turning
HOW TO CLEAN THE OBJECTIVE LENS
2
With a circular motion,
wipe the top lens
surface with the cotton
swab, to thoroughly
remove any oil or dirt
from the lens.
Put it on the desk
- 3 -
it upside down. Refer to page 10.)
3
Dip a new cotton swab
in the cleaning solution
and shake vigorously
to remove any excess
cleaning solution.
Cleaning the immersion objective:
Wipe off the immersion oil while absorbing
it with lens tissue that is not moistened.
After that, clean the lens as the same manner
mentioned on the left.
When the top surface of lens frame is higher
than that of lens and remained dirty potion
on the periphery of lens can not be wiped off,
clean the lens referring the above figures,
1 to 4.
4
wipe the objective lens
from the center towards
the periphery, while
rotating the lens.