Olympus BX3-25ND6 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus BX3-25ND6. Olympus BX3-25ND6 36 stron.

USING THE CONTROLS

1. Make sure that the power cord and connecting cables are plugged in securely.

2. If you perform only transmitted light phase contrast or transmitted light DIC observations, leave one cube position on the

turret empty. This allows for transmission of white light.

The turret must always be set to one of the click position. If it is deviated from a click position, the cover may be deformed

by heat.

3. Always use Olympus immersion oil for oil immersion objectives.

4. If you use an objective with correction collar, you can correct contrast degradation due to variation in cover glass thickness

by adjusting the correction collar.

Correction procedure

If the cover glass thickness is known, match the correction collar to the cover glass thickness using the collar scale

provided. If the thickness is not known, turn the collection collar and adjust the fine adjustment knob to where the

image contrast is best.

5. Engage the shutter if you interrupt observation for a short time.

(Turning the mercury burner ON and OFF repeatedly will significantly shorten the life span of the burner.)

6. Color fading of specimens

This system features high excitation light intensity to ensure bright observation of dark fluorescence specimens.

In consequence, after long period of observations using high-power objectives, the colors of specimens will fade quicker

than usual, causing the view (contrast) of fluorescent images to deteriorate.

In such a case, slightly reduce the excitation light intensity to slow color fading down and improve the fluorescence

images.

To reduce the excitation light intensity, use ND filters or aperture iris diaphragm as far as the observation is not affected

or use the shutter to limit the exposure of specimen to more than necessary light.

Commercially-marketed color fading protection agent (DABCO, etc.) can also delay fading of specimen colors. The use

of fading protection agent is recommended especially when you perform high-magnification observations frequently.

Remember that the fading protection agents cannot be used with certain kinds of specimens.

CAUTION

Select the fluorescence mirror unit which matches the fluorochrome in use.

} Usage according to the excitation light bandwidth:

A set combining excitation filters for different bandwidth can be used according to the type of excitation light.

The wide-band (W) set is normally used. However, when the fluorescence emitted from substances other than the

fluorescent stain is strong, the Narrow-band (N) set is recommendable.