Olympus BX3-RFAS Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus BX3-RFAS. Olympus BX3-RFAS 16 stron. Coded function system
Również dla Olympus BX3-RFAS: Instrukcja obsługi (36 strony), Instrukcja obsługi (16 strony)

Drukuj stronę

1. System Chart

SYSTEM CHART

· Entrust the assembly and adjustments of the modules marked* to Olympus.

CAUTION

The connectors of the U-CBS are sealed with dust covers. Remove the dust covers only from the connectors

you want to connect cables.

· Be sure to connect the module designated by Olympus to each connector. If a non-designated module is

connected, the performance of the entire system cannot be guaranteed.

· Before connecting the cables, make sure that the POWER switch of the U-CBS control box is set to OFF (out

position).

Hold each connector in the appropriate orientation and insert it all the way into the connector. If a connector

is provided with clamping screws, be sure to tighten them.

· Do not insert a non-designated connector. Otherwise, the connector may be damaged.

Coded Fluorescence

Illuminator *

BX3-RFAS

Microscope Frame

BX43F

BX53F

Control Box for Coded Units

U-CBS

U-D7RES

U-5RES-ESD

U-D5BDRES-ESD connector

BX3-RFAS connector *

RS-232C cable

Option connector

U-HSEXP connector

Note 3)

CODED FUNCTION SYSTEM

Note 2)

· PC

Note 4)

· DP21

(Microscope

Digital Camera)

Note 1)

AC adapter