Olympus BX3-SSU Instrukcja obsługi - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus BX3-SSU. Olympus BX3-SSU 20 stron. Scanning stage with ultrasonic
Również dla Olympus BX3-SSU: Instrukcja obsługi (24 strony)
![Olympus BX3-SSU Instrukcja obsługi](/uploads/products/server2/4282034/4282034.png)
2
1
Fig. 7
3
4
Fig. 8
2
Connecting the Power Cord
· Be sure to set the main switch of the BX3-CBH control box to
CAUTION
"
" (OFF) before connecting cables.
· Cables and cords are vulnerable when bent or twisted. Never
subject them to excessive force.
· Always use the power cord provided by Olympus. If no power
cord is provided, please select the proper power cord by referring
to the section "PROPER SELECTION OF THE POWER SUPPLY
CORD" at the end of this instruction manual.
1. Insert the connector 1 of the power cord firmly into the connector 2.
The power cord should be connected to a grounded/earthed,
CAUTION
3-conductor power outlet. If the power outlet is not grounded/
earthed properly, Olympus can no longer warrant the electrical
safety performance of the equipment.
2. Plug the power cord plug 3 into the wall outlet 4.
Should the power cord come in contact with the hot lamp
CAUTION
housing, the power cord could melt and cause electric shock.
Be sure to route the power cord away from the lamp housing.
BX3-SSU
(Figs 7 to 8)
12