Olympus BX3-SSU Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus BX3-SSU. Olympus BX3-SSU 24 stron. Scanning stage with ultrasonic
Również dla Olympus BX3-SSU: Instrukcja obsługi (20 strony)

Drukuj stronę

Getting Ready

1. The scanning stage with ultrasonic is a precision instrument. Handle it with care and avoid subjecting it to sudden or

severe impact.

2. When the scanning stage with ultrasonic needs to be packaged for forwarding to a remote location, it should be clamped

using clamping hardware. Please contact Olympus (to obtain advice).

3. Do not use the instrument where it is subjected to direct sunlight, high temperature and humidity, dust or vibrations.

Also avoid using it in the following places.

(1) Near an air intake or outlet of an air conditioning facility, etc.

(2) Place subject to important vibrations or changes in temperature.

(3) Near a source (including equipment not manufactured by Olympus) of abnormal noise.

(4) Place subject to direct sunlight.

(5) Place exposed to excessive dust or high temperature/humidity.

(6) Near a flammable substance (gasoline, lacquer thinner, alcohol, etc.).

4. Leave certain slack to the stage cable so that they are not over-tensioned when the stage is moved.

5. When the power is turned ON, do not move the stage by hands.

6. Whenever emergency stop is necessary during motorized movement, the stage can be stopped by holding it by hand.

7. Before replacing the fuse, be sure to set the main switch of the control box to "

safety.

8. Do not touch the actuator of the stage barehanded, or do not attach foreign objects, such as oil, grease, etc. on it. Otherwise

the stage could break down.

9. The operating sound of the stage may be louder depending on the use environments or the use status (moving speed

of the stage), but this is not unusual.

Maintenance and Storage

1. To clean the parts, simply wipe them with a clean cloth. If a part is extremely dirty, do not use organic solvents but use a

soft cloth slightly moistened with a diluted neutral detergent.

2. Do not disassemble any part of the microscope except for the parts that are specified to be disassembled in this manual,

as this could result in malfunction or reduced performance.

3. Before disposing of this product, be sure to follow the regulations and rules of your local government.

Caution

If the instrument is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,

the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

Downloaded from

ManualsNet.com

The following symbols are used to set off text in this instruction manual.

: Indicates a potentially hazardous situation which, if not avoided, may result in minor

CAUTION

or moderate injury or damage to the equipment or furniture in the surroundings. This

symbol is also used to warn against risky actions.

}

: Indicates commentary (for ease of operation and maintenance).

search engine

BX3-SSU

" (OFF) and unplug the power cord for