Olympus bx40 Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus bx40. Olympus bx40 33 stron. Replacement illuminator
Również dla Olympus bx40: Instrukcje instalacji (4 strony)

Drukuj stronę

BX40

Fig. 19

Fig. 20

Fig. 21

Fig. 22

SpeMnefl

Placement

(Figs. 19-21)

+ For Single slide observations,

the maximum

slide dimensions

are 26 x 76 mm, with a thickness

of 0.9-1.4 mm and a cover

glass thickness of 0.17 mm.

+ When observing

very large specimens,

remove the slide holder

and place the specimen

directly on the Stage.

1 Slide Holder for 2 Soecimens

(Fis. 19) j

1. Turn the coarse adjustment knob @ to lower the Stage.

2. Open the spring-loaded curved finger @ on the slide holder and place

one or two specimen slides on the Stage from the front.

3. After placing the slides as far as they will go, gently release the curved

finger.

Slide Holder for Single Specimen

(Figs. 20, 21)

5-l

The specimen tan easily be placed by sliding it into the slide holder

from the front. (Fig. 20)

Using an Oil Immersion

Objective

Adsorption of immersion oil tan Cause the specimen to drift. In such

cases, it is recommended

to use the optional

specimen

Clip @

(BH2-SCB-3) for oil immersion objectives 0. (Fig. 21)

Adjusting

the Tension

of the X-axis

and V-axis Knobs

(Fig. 221

The tension of the X-axis and Y-axis knobs tan be individually adjusted.

Turning the X adjustment ring @ or the Y adjustment ring @ counter-

clockwise

increases tension, and turning them clockwise

reduces

tension. When adjusting the tension, hold the X-axis and Y-axis knobs

to keep them from turning along with the tension adjustment

rings.

+ If the tension

is adjusted

to tight,

a creaking

Sound may be

heard during Stage travel, and the Stage may backtrack.