Olympus BX51M Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus BX51M. Olympus BX51M 36 stron. System metallurgical microscope
Drukuj stronę
CONTENTS
Correct assembly and adjustments are critical for the microscope to exhibit its full performance. If you are going to
assemble the microscope yourself, please read chapter 8, "ASSEMBLY" (pages 27 to 29) carefully.
IMPORTANT
- Be sure to read this section for safe use of the equipment. -
1
NOMENCLATURE
2
REFLECTED LIGHT BRIGHTFIELD/DARKFIELD OBSERVATION PROCEDURE
3
3-1 Base ........................................................................................................................................................................................................................... 7
1
Voltage Indication
3-2 Focusing Block ................................................................................................................................................................................... 8-9
1
Adjusting the Focus
3
3-3 Reflected Light Brightfield/Darkfield Illuminator (BX-RLA2) ............................................ 9-11
1
Selecting the Light Path
3
5
3-4 Stage ............................................................................................................................................................................................................ 12-14
1
3
5
3-5 Observation Tube ..................................................................................................................................................................... 15-16
1
3
5
Selecting the Light Path of the Tinocular Tube
4
4-1 Reflected Light Brightfield/Darkfield Observation .............................................................................. 17
4-2 Reflected Light Nomarski DIC (Differential Interference Contrast) Observation .............. 17-19
4-3 Reflected Light Simplified Polarized Light Observation ............................................................ 19
5
6
7
8
PROPER SELECTION OF THE POWER SUPPLY CORD ....................................................................... 30-31
2
Using the Light Intensity Preset Switch
2
Replacing the Fine Adjustment Knob
2
Centering the Field Iris Diaphragm (FS)
2
4
- See this section for the replacement of the light bulb. -
4
4
2
4
6
BX51M
1-3
4
5-6
7-16
17-19
20-22
23
24-26
27-29