Olympus BX53-P Instrukcja obsługi - Strona 22

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus BX53-P. Olympus BX53-P 36 stron. Polarizing microscope

Fig. 24

Fig. 25

Cross lines

Conoscopic image

Note: During conoscopic observation, the center of the conoscopic image

@ and the intersection of the cross lines ² may not coincide.

However, employment of the universal infinity optical design ensures

that this disagreement will have no measurable effect during actual

observation.

However, if the disagreement is distracting, adjust in the same manner

as when using the U-CPA (for photomicrography), described in the

following paragraph.

When Using Intermediate Attachment for conoscopic and orthoscopic

observation (U-CPA)

· Photomicrography

1. Using the tip of a mechanical pencial, etc., push out, in the direction of

the objective hole, the black rubber plugs inserted into the centering

holes of the primary hole where the 20X or 10X objective is inserted.

2. Pull out the Bertrand lens knob @ to the OUT (¦) position. (Fig. 25)

3. Adjust the position of the intermediate tube (Refer to page 7.)

4. Center the condenser. (For details, see instructions of each microscope.)

5. Push in the Bertrand lens knob @ to the IN ({) position for conoscopic

observation.