Olympus Fluoview FV1000 Krótkie instrukcje - Strona 3

Przeglądaj online lub pobierz pdf Krótkie instrukcje dla Mikroskop Olympus Fluoview FV1000. Olympus Fluoview FV1000 7 stron. Confocal microscope
Również dla Olympus Fluoview FV1000: Przegląd (28 strony), Podręcznik użytkownika (42 strony), Krótkie instrukcje (7 strony), Podręcznik użytkownika (9 strony), Manuallines (3 strony)

Olympus FV1000

2. General guidelines

1. Lab rules:

This room is a S2 laboratory.

At times when S2 experiments are performed in this room, you are not

allowed to enter the room. S2 experiments will be indicated by a sign at the

outside of the door and in the online booking system.

When no S2 experiments are performed everyone who is authorized by the

facility staff can enter the room.

You always have to wear a lab coat. Lab coats can be left in the cupboard,

first door left from the entrance.

2. Booking and keys:

The use of the Olympus FV 1000 system is restricted to live cell experiments.

Before you can use the microscope you have to make a reservation in the online

booking system. Please note in the reservation the desired temperature. If you

don't use the climatisation control not this also in the reservation

Always pick up a key from Carsten Lindloff in room 1052. Office hours: Monday

to Thursday, 7:30 – 16:00; Friday 7:30 – 14:30. Phone: -8458. If you are planning

to use a microscope outside these hours, pick up a key in advance.

When you are leaving lock the microscope room and after 16:00 also lock the

main door of the facility. Return the key to Carsten Lindloff or to the mail box of

the Laser Microscopy Facility, level S, in the hallway left from the stair case,

second row, in the center.

3. Climatisation control:

Please note in the online reservation the desired temperature.

Carsten Lindlow will switch on the temperature control early in the morning to

ensure that the incubation chamber has reached the temperature when you start

your experiment.

But you are responsible for setting CO2 and humidity as well as for switching off

the climatisation control. Read chapter

4. Immersion oil:

Always remove old immersion oil, before you add new ones.

Only use the lens tissues provided by the Laser Microscopy Facility staff.

In case there is oil on no-oil objectives, don't try to clean them but leave a note

in the log book.

-3-

Short instructions