Olympus U-MDO10R3 Instrukcja obsługi - Strona 27
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus U-MDO10R3. Olympus U-MDO10R3 40 stron. For 2, 5, 9, 10 and 13 persons
Drukuj stronę
b
1
a
d
c
b
a
1
2
2
Rubber leg position
Rubber leg position
c
4
Attaching BX3-MDOE
1
Attach BX3-MDOE b to the tube mount a on U-MDOSV.
2
Tighten the clamping screw c to secure BX3-MDOE to U-MDOSV.
Attach BX3-MDOE so that the clamping screw c of U-MDOSV
and the clamping screw d of BX3-MDOE are aligned in one line
perpendicularly.
5
Attaching the stand
1
Place U-MDOSV on the desk upside down and screw the b portion
of the stand into the mount screw hole a of U-MDOSV.
2
Loosen the stand height lock knob c . Rotate the
in the picture and place one of three rubber legs attached to the
back side of the base of the stand so that it is parallel to the tube of
U-MDOSV as shown in the picture.
portion shown
23