Olympus U-TR30-2 Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus U-TR30-2. Olympus U-TR30-2 36 stron. Motorized illumination system with motorized focusing unit
Drukuj stronę
Focus Adjustment Knob Unit U-FH
The button functions shown below refer to those in the standalone operation.
The button functions indicated inside
The button functions in PC control can also be set arbitrarily. For their allocation, refer to the tutorial or help of the BX2-BSW
software (Ver. 03.01 or higher).
After deciding the button functions, attach the provided function name stickers near the buttons.
For the abbreviations and symbols, refer to the table at the bottom of this page.
Objective escape/return button (Page 12)
Lamp ON/OFF
Fine/Coarse switch button (Page 12)
Focusing motor ON/OFF
Objective Down button (Page 12)
F/C selector
Transmitted/reflected light switch
button*
Option
* If the halogen bulb does not light up, press this button once.
Abbreviation or Symbol
are the initial settings in the control from a PC running the BX2-BSW software.
Focus adjustment knob
Function
Fine/Coarse switching
Lamp ON/OFF
Photo voltage ON/OFF
Focus adjustment frame/U-FH
Z-focusing motor ON/OFF
Objective escape/return
Shutter IN/OUT
Condenser top lens IN/OUT
Up/down operation such as light inten-
sity or objective height adjustment
Left/right operation such as mirror unit
or filter wheel movement
Objective Up button (Page 12)
Objective escape/return
Connect to U-IFFH.
Remark
Not used with the BXFMA.
OFF for electrical noise reduction
Not used with the BXFMA.
Write the applicable functions in the
blank areas using an oil-ink pen.
BXFMA
Connector
7