Olympus X-Tr Instrukcja naprawy - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja naprawy dla Mikroskop Olympus X-Tr. Olympus X-Tr 30 stron. Trinocular stereo microscope
Również dla Olympus X-Tr: Instrukcja naprawy (30 strony)
Drukuj stronę
(See Fig. 2)
2-6)
Unscrew four HK2.6x5SA and remove bearing AA4863.
2-7)
Disassemble right knob AA4860 from bearing AA4862 in the same manner as
above.
2-8)
Pull out lens drum.
3.
Disassembly of Objective Mount
3-1)
Unscrew four HK2x4SA and remove objective cover AA4956.
3-2)
Unscrew four HK2.6xl5SA and remove adjusting washer AA4954.
3-3)
Unscrew objectives.
Unscrewing NU2.6x5SA and NU2.6x8SA, remove retaining frame AA4876.
When
this frame was shellaced, immerse it with alcohol for a few minutes
prior to removal, then loosen it.
Objective frame AA4955 can be removed
'r..-J
'"lt:!ruuv'.mg
"t:wo screws ""Hl("Lx4BB.
4.
Disassembly of Prism Mount
4-1)
Unscrew four HK2.6xl2SA, and remove prism mount AA4949 and plate AA4953.
4-2)
Unscrew four 3PUK1. 7x3SA and remove two P-holders AA4871.
4-3)
Unscrew two HK1.4x2.5Sli, and remove P-holder AA4952.
4-4)
Loosen three HU2x4SA, and then remove two prisms LP0386, prism LP0392
and three side plates AA3399.
- 5 -