Olympus PPO-E02 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer Olympus PPO-E02. Olympus PPO-E02 10 stron. Underwater lens port for the pt-e series
Również dla Olympus PPO-E02: Wykres systemowy (1 strony)

Drukuj stronę

Attaching the Zoom Gear on the Lens

To control zooming of the camera lens, the provided zoom gear must be attached to the zoom ring of the lens.

Hinge

Open

Lock dial

Gear

Align the hinge

with the index.

Push the gear with a finger

to place the gear against

the lens.

Turn the lock dial

to lock the zoom

gear.

CAUTION:

Turn the zoom ring of the lens so that the correct number

(see the following table) is aligned with the zoom index.

Corresponding lens

ZUIKO DIGITAL 14-54mm F2.8-3.5

ZUIKO DIGITAL 11-22mm F2.8-3.5

Check the position of the lock dial's hinge on the zoom gear,

then turn the lock dial counterclockwise to release the lock

and open the gear.

Open the zoom gear wide and align its hinge with the zoom

index on the lens. Place the zoom gear on the lens and

adjust the rotation direction of the zoom gear. At this time,

bring the gear section of the zoom gear to the left of the

hinge as shown in the illustration.

Set the front-rear direction of the zoom gear by aligning the

edge of the hinge with the end of the rubber section on the

lens' zoom ring.

After positioning the zoom gear, place it against the lens's

zoom ring (taking care not to displace the zoom gear), and

turn the zoom gear's lock dial all the way clockwise to lock it.

E-4

Number to align with

the zoom index