Olympus PT-044 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer Olympus PT-044. Olympus PT-044 35 stron. Underwater case for digital camera fe-360; x-875; c-570

Drukuj stronę

Setting the underwater shooting scene mode

The FE-360/X-875/C-570 cameras incorporate several shooting scene

modes for underwater shooting, including wide-angle and macro modes.

Simply select the mode that's most appropriate for the scene you are

shooting.

For details, see "5. Underwater Shooting According to the Scene

Type" (P.24) of this manual.

For details on mode setting, refer to the digital camera's operation

manual.

For Prevention of Water Leakage Accidents

When water leakage occurs while this product is being used, repair of the

camera housed in this product may become impossible. Please observe

the following cautions for use.

1 When sealing this product, make sure that no hairs, fibers, sand particles or

other foreign matter stick not only to the O-ring, but also to the contact

surface (front cover). Even a single hair or a single grain of sand may cause

water leakage. Please check with special care.

Examples of foreign matter sticking to the O-ring

Hair

2 The O-ring is a consumable part. Please replace it at least once a year with

a new one. Before each use, perform the proper maintenance.

3 Deterioration of the O-ring will acelerate according to the use conditions and

the storage conditions. Immediately replace the O-ring with a new one if it

is damaged, cracked, or has lost its elasticity.

4 During O-ring maintenance, clean the inside of the O-ring groove and

confirm the absence of dirt, dust, sand, and other foreign matter.

5 Apply the specified silicone grease to the O-ring.

Fibers

Grains of sand

EN 5