Olympus PT-EP08 Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer Olympus PT-EP08. Olympus PT-EP08 25 stron. Underwater case

4. How to connect the underwater flash

To connect the UFL-2 underwater flash (optional) to the Case using an underwater optical fiber cable

(optional: PTCB-E02), follow the procedures below.

How to connect the underwater optical fiber

cable

1 Remove the cap of the optical fiber cable

insertion slot.

2 Put the underwater optical fiber cable plug all the

way into the optical fiber cable insertion slot.

Setting of the digital camera

Set the RC mode of the camera to ON so that the camera's built-in flash is activated.

In case of UFL-2, turn the RC mode to OFF.

For details, refer to the instruction manual of UFL-2.

In case of UFL-1, plug the optical fiber cable in the same way.

Turn the RC mode of the camera to OFF.

EN 16