Olympus SP-310/SP350 Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer Olympus SP-310/SP350. Olympus SP-310/SP350 44 stron. Underwater case

2. Advance Check of the Case

This Case has been the subject of thorough quality control for the parts

during the manufacturing process and thorough function inspections

during the assembly. In addition, a water pressure test is performed

with a water pressure tester for all products to confirm that the

performance conforms to the specifications. However, depending on

the carrying and storage conditions, the maintenance status, etc., the

waterproof function may be damaged.

Before diving, always perform the following advance test and the water

leakage test after installation of the camera.

Check the parts that ensure the case is waterproof.

1. Make sure that the O-ring between the front and rear lids of the

case is attached firmly and the buckle is tightly secured.

2. Make sure that the O-ring on the TTL cable connector cap is

attached firmly and that the cap is fitted tightly to the connector.

E-16