Axkid Rekid Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Fotelik samochodowy Axkid Rekid. Axkid Rekid 16 stron.

Axkid Rekid Instrukcja obsługi
10
If you have installed Rekid in the back seat
you can now move the front seat to a com-
fortable position. The back of the child re-
straint can, but is not necessary, be in con-
tact with the back of the front seat.

Adjusting the internal harness

Place your child in the car seat. Put your
child's arms in between the shoulder straps
so that the straps are hanging over the chest
and stomach. Pull the shoulder straps to-
gether and insert the harness tongues into
the crotch buckle. Push the harness up over
the childs hip. Pull the harness adjustment
strap (13). It´s important that you always
pull the harness straight and central. Other-
wise you might have a that the adjustment
13
strap gets stuck in the metall-lever(13).
This action will tighten the harness and
the headrest will automatically slide down
to the appropriate height. To release the
harness, press the harness adjustment but-
14
ton and pull both harness straps. Press the
red button on crotch buckle to disengage
buckle.

Parking brake on headrest

The headrest on your Rekid is
equipped with a parking brake. This
could be used if you want the headrest in a
fix position. To activate the parkingbrake,
pull the harness until the headrest is at
the desired height, you will hear a "click"
sound from the headrest as it locks into
position. Make sure that the headrest can
not be pulled down. Activate the brake
by moving the lever (14) on the headrest
across to the right. Do not pull up the
headrest with the parking brake activated.